cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 
Document & Visualize forum

Interior Elevation Auto Scale Problem

toman311
Enthusiast
Hey all,

I have an Interior Elevation tag created in the office template and it automatically puts all interior elevation views at 3/8"=1'-0".

Is there anyway to get it to be 1/2"-1'-0" automatically when I create the Interior Elevation tag. If I can do this, then I won't have to manually change all of the Interior Elevation views scale to what we always draw in, which is 1/2"=1'-0" and not 3/8"=1'-0".
>ArchiCAD 23, 7000 USA FULL

>iMac, 27-inch, 2020, Processor: 3.8 GHz 8-Core Intel Core i7, Memory: 64 GB 2667 MHz DDR4, Graphics: AMD Radeon Pro 5500 XT 8 GB
2 REPLIES 2

Laszlo Nagy
Community Admin
Community Admin
As far as I can see the Interior Elevation does not have a default Scale setting and so it inherits the scale of the Viewpoint it is created in.
So try to set your Floor Plan Viewpoint to the desired scale and then create all your Interior Elevation Markers. They should all inherit the desired scale.
....................................................................................................
Get Archicad Tips at https://twitter.com/laszlonagy
AMD Ryzen 1700X CPU, 48 GB RAM, Nvidia GTX 1060 6GB, 500 GB NVMe SSD
2x28" (2560x1440), WIN10 PRO ENG, AC20-AC26
Loving Archicad since 1995

toman311
Enthusiast
Thanks for the reply!

To bad about that scale "rule". I wish we could set that scale fixed under it's settings since the Interior Elevations in our office are always drawn at 1/2" = 1'-0".

Still, I get your work around.

I'll just have to alter the scale, briefly, before I create the Interior Elevations. Still, I wish the process was foolproof. I guess that work around is just something everyone will have to remember or learn.
>ArchiCAD 23, 7000 USA FULL

>iMac, 27-inch, 2020, Processor: 3.8 GHz 8-Core Intel Core i7, Memory: 64 GB 2667 MHz DDR4, Graphics: AMD Radeon Pro 5500 XT 8 GB

Start a new conversation!

Still looking?

Browse more topics

Back to forum

See latest solutions

Accepted solutions

Start a new discussion!