removal of contour lines from walls

[Lucas343]

Hello group. This image is extremely simple, but my question is very technical.
How do I make the wall have only 1 contour projection line? In this picture, I applied the wall view in projection, continuous projection line and no end lines, however I can't find a way to hide both the outer line and the inner line of the wall profile.
I couldn't find anything in the manual that talks about this.

[SenecaDesignLLC]

Walls have thickness and will always show both lines

[Lucas343]

isn't there some way to hide the interior line?
In my city, project approval only considers the face of the exterior wall.

every time I have to approve a project I have to redo the perimeter with hachure and hide the walls,

[SenecaDesignLLC]

Not that I'm aware of.

[kim · Accepted solution]

I recommend creating a wall composite with only one core element, then you can control the pens to only show on the outside on none on the sides. This would require creating a lot of variants if you have multiple thickness. Otherwise draw a fat polyline around your external building as a 2D outline. If it doesnt suit, I hope you are able to achieve it another way. Best wishes.

Menu>Options>Element Attributes>Composites

[Lucas343]

this was very helpful, thank you very much for the information.
it helped me a lot

[Lingwisyer]

Please mark the post that helped as the Solution, not your own reply to it...

[Barry Kelly]

I have sorted that out.

Barry.

[Rico · Accepted solution]

And just to add that if you do have multiple thicknesses, you can use a complex profile wall instead of a composite. You can control the contour visibility for each edge and still be able to.adjust the wall thickness.