Libraries & objects
About Archicad and BIMcloud libraries, their management and migration, objects and other library parts, etc.

Door will not display open in 2D and Closed in 3D

What would cause this ?
I have some doors that will not display closed in 3D and open in 2D.

Notice in the picture that the 3D setting for door opening is 0 deg. but is shows open the same as the 2D setting. ??

The 3D setting for this can not be edited either. What could be the problem ?

It seems to work fine in a fresh Template. I have tried to reload the library but it is still the same problem with some doors. ??

2015-09-18_18-49-39.png

ArchiCAD 25 7000 USA - Windows 10 Pro 64x - Dell 7720 64 GB 2400MHz ECC - Xeon E3 1535M v6 4.20GHz - (2) 1TB M.2 PCIe Class 50 SSD's - 17.3" UHD IPS (3840x2160) - Nvidia Quadro P5000 16GB GDDR5 - Maxwell Studio/Render 5.2.1.49- Multilight 2 - Adobe Acrobat Pro - ArchiCAD 6 -25

2 REPLIES 2
Barry Kelly
Moderator
I am not too familiar with these doors as I don't use them.
But I seem to recall an option that says 'set 3D opening the same as 2D'.
Doesn't seem to be in the settings you show so maybe it is in the Model View Options.
Or tick the override MVO option and see what you can do.

Barry.
One of the forum moderators.
Versions 6.5 to 27
Dell XPS- i7-6700 @ 3.4Ghz, 16GB ram, GeForce GTX 960 (2GB), Windows 10
Lenovo Thinkpad - i7-1270P 2.20 GHz, 32GB RAM, Nvidia T550, Windows 11
It turned out to be a problem with library migration.
It never occurred to me to migrate the 19 library. I did and then I was able to delete the door and place it again. Now the option to show the door open in2D and closed in 3D is available again.
2015-09-18_21-19-48.png

ArchiCAD 25 7000 USA - Windows 10 Pro 64x - Dell 7720 64 GB 2400MHz ECC - Xeon E3 1535M v6 4.20GHz - (2) 1TB M.2 PCIe Class 50 SSD's - 17.3" UHD IPS (3840x2160) - Nvidia Quadro P5000 16GB GDDR5 - Maxwell Studio/Render 5.2.1.49- Multilight 2 - Adobe Acrobat Pro - ArchiCAD 6 -25

Start a new conversation!

Didn't find the answer?

Check other topics in this Forum

Back to Forum

Read the latest accepted solutions!

Accepted Solutions

Start a new conversation!