4 way wall intersection

[SimSmi1]

Hi all, I am having trouble getting a staggered intersection between 4 walls to work cleanly. My current result is:

 Reference lines are as follows:

In Revit I would have just hidden the rogue line but if I can't get this to work then I guess the only option is a 2D patch fill (which i's rather avoid if I can). Any help would be most appreciated, Thanks

[Lpalma]

You could solve that intersection with a piece of wall the full width of the intersection.

I hope this helps.

[BerndSchwarzenbacher]

Putting the reference lines on the "outside" of the intersection often works in such situations.

Hope that helps,
Bernd

[Mahmoud Qenawi]

Or you can mirror the reference line for this wall.

*And then stretch it to the nearest edge.

[Laszlo Nagy]

Another method is to model the central Wall geometry using the "Polygonal" Geometry Method and let all the other Walls join that geometry.

(This works only for non-composite walls.)

 

[Eduardo Rolon]

Or you can use a column for the classic workaround from 2010.

https://onland.info/archives/2010/07/fixing_wall_corners_with_columns.php

[SimSmi1]

Amazing, thanks everyone!