Compoite wall Intersection 13 - skin does not cut

[Anonymous]

Why
I tried many priorities

[Barry Kelly]

Your centre skin has a priority of 0 and the gypsum is 10.
So the centre skin can't punch through the outer ones.
You need a priority higher than 10 and it should work fine - for this particulsr situation at least.
Barry.

[Rod Jurich]

Adalbert wrote:
Why
I tried many priorities

Albert, take a look here
and here, best explanation yet by Cecilia.

[Anonymous]

Tank you for the help
I tried figure A and does not work

[Erika Epstein]

Adalbert,
Have you checked that the walls have skin priorities enabled?
Select the walls,
Floor Plan and Section>Structure> Enable Skin Priorities

[Anonymous]

Yes I do not have problems with all the wall just this one. I will create new walls maybe that will solve the now that I understood the logic

[Anonymous]

New walls will cut old ones refuse to cut.
I have replaced them and cleared the old ones.
Tnaks for all the help.

[Laszlo Nagy]

Adalbert wrote:
New walls will cut old ones refuse to cut.
I have replaced them and cleared the old ones.
Tnaks for all the help.

I have seen this problem not long ago on AC12.
It drove me crazy.
I did the same thing: delete the affected Walls, create new ones which did the cut. I have no idea of the reason.