Cutting on a round wall

[Anonymous]

Greetings to all Users

I have a problem, regarding modelling - I am not able (I don't know how to do it) to cut wall irregular (need to model it like it is for reconstruction purpouse).

I would apprieciate any help with this topic 😉

[David Maudlin]

ARGAS:

You should look at Solid Element Operations (in the Help files see: Elements of the Virtual Building > Solid Element Operations). To use this you will need to create some elements that are the size and location of the parts of the Wall to be removed (could be other Walls, Slabs, Morphs, etc.), then use these elements to remove part of the target Wall. The operator elements can then be put on a hidden layer, but not deleted.

You should add a Signature to your Profile (click the Profile button near the top of this page) with your ArchiCAD version and operating system (see mine for an example) for more accurate help in this forum.

David

[Anonymous]

David wrote:
ARGAS:

You should look at Solid Element Operations (in the Help files see: Elements of the Virtual Building > Solid Element Operations). To use this you will need to create some elements that are the size and location of the parts of the Wall to be removed (could be other Walls, Slabs, Morphs, etc.), then use these elements to remove part of the target Wall. The operator elements can then be put on a hidden layer, but not deleted.

You should add a Signature to your Profile (click the Profile button near the top of this page) with your ArchiCAD version and operating system (see mine for an example) for more accurate help in this forum.

David

Thank you David, that should do the work. Will show effects afterwards.

Karol

[David Maudlin]

Karol:

Yes, please post an image when done. Thanks for adding the signature.

David