I want to fill the mesh with fill like in cad in elevation. What should I do?

[LeeJaeYoung]

I want to fill the mesh with fill like in cad in elevation.
What should I do?

how i know
1. Turn off the mesh and redraw the Fill.

[Barry Kelly]

The mesh needs to be solid (which it looks like yours is) and then use a building material that has the cut fill type that you want to see.

Barry.

[LeeJaeYoung]

Can you show me the material?
I can see it from the section, but not from the elevation.

[Kevin Lee]

If you want the earth fills from the "Elevation" you need to control it via cover fill (like how you would normally show brick pattern from elevation)

1. Check your section/elevation to show "Surface cover fill Foreground" on

2. Choose the mesh edge with earth cover fill (check your surface)

[LeeJaeYoung]

thank you
do you mean this?
Are there any other settings?

[Barry Kelly · Accepted solution]

Sorry for some reason I was thinking of a section not an elevation.

In elevation it is the surface that has to have a fill associated to it as Kevin mentioned.

And you must turn on the 'Surface Cover Fill Foreground' in the elevation settings as you have shown.

Barry.

[LeeJaeYoung]

Thank you so much