Wall Cleanup

Steve Jepson · ‎2013-06-13

Any ideas how to clean this up and add a correct wall end for this composite?

ArchiCAD 25 7000 USA - Windows 10 Pro 64x - Dell 7720 64 GB 2400MHz ECC - Xeon E3 1535M v6 4.20GHz - (2) 1TB M.2 PCIe Class 50 SSD's - 17.3" UHD IPS (3840x2160) - Nvidia Quadro P5000 16GB GDDR5 - Maxwell Studio/Render 5.2.1.49- Multilight 2 - Adobe Acrobat Pro - ArchiCAD 6 -25

Anonymous · ‎2013-06-13

Hi Steve,

Have you tried the Wall End tool? The 'Returned End' type should work for you, but you will need to tell it how many skins to turn.

It is also a little flakey if you have skins that don't have skin end lines.

Hope that helps.

Steve Jepson · ‎2013-06-14

Thanks. This is close enough for now.

ArchiCAD 25 7000 USA - Windows 10 Pro 64x - Dell 7720 64 GB 2400MHz ECC - Xeon E3 1535M v6 4.20GHz - (2) 1TB M.2 PCIe Class 50 SSD's - 17.3" UHD IPS (3840x2160) - Nvidia Quadro P5000 16GB GDDR5 - Maxwell Studio/Render 5.2.1.49- Multilight 2 - Adobe Acrobat Pro - ArchiCAD 6 -25

Jere · ‎2013-06-14

If it's really critical, you could always just make a matching complex profiled column and place it at the end of the wall.

ArchiCAD 26; Windows 11; Intel i7-10700KF; 64GB RAM, GeForce GTX 3060

Steve Jepson · ‎2013-06-14

It's not critical, it's just too bad when the tool is almost able to do the job.

I will keep tweaking the wall to see if there is some end wall line or something that would make it perfect.

ArchiCAD 25 7000 USA - Windows 10 Pro 64x - Dell 7720 64 GB 2400MHz ECC - Xeon E3 1535M v6 4.20GHz - (2) 1TB M.2 PCIe Class 50 SSD's - 17.3" UHD IPS (3840x2160) - Nvidia Quadro P5000 16GB GDDR5 - Maxwell Studio/Render 5.2.1.49- Multilight 2 - Adobe Acrobat Pro - ArchiCAD 6 -25

Anonymous · ‎2013-06-14

As I mentioned, the missing line is probably caused by the outer skin not having a skin end line assigned in the composite settings. It's easy to change to test if it works.

Wall Cleanup

Still looking?

Browse more topics

See latest solutions

Start a new discussion!