Wall Display intersection

[sma2bim]

 The priority are good ,

but the lines of wall core continue to the outside of the other wall. 

[sma2bim]

indeed 1,2 & 5 🙂 

Actually the two wall are interior so two plaster types will be a mess to manage in the quantities (another software). 

Hope graphisoft will work in this little issues (coz there many) 

[Mahmoud Qenawi · Accepted solution]

I manage this problem like this:

# If the two walls 3&4 have the same BM, I'd only duplicate the BM with different (name & cut fill) while keeping priority and all settings the same.

 

 

# If the two walls 3&4 have different BM I'd only check that they've the same priority as they already have different cut fills.

Then I split the vertical wall 3 exactly at the reference line of the horizontal wall.

 so that's the result.

 

[sma2bim]

Thank you ,

actually this solution works .

[Mahmoud Qenawi]

I'm happy it worked, thank you.