SOLVED!
Assing a zone to multiple rooms
Anonymous
Not applicable
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
2020-02-05
08:40 AM
- last edited on
2023-05-19
11:56 PM
by
Gordana Radonic
2020-02-05
08:40 AM
In certain situations I would need a zone to be assigned to multiple rooms so that it calculates their combined area. The problem is, whenever I do that i basically have to do it manually because the zone updating tool would only work for one enclosure.
Therefore, in the following example, is there a way to calculate the combined area of both rooms using just one zone?
Solved! Go to Solution.
1 ACCEPTED SOLUTION
Accepted Solutions
Solution

Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
2020-02-06 02:20 AM
2020-02-06
02:20 AM
Select your dividing wall and change its Relation to Zones to "Reduce Zone Areas Only" .
Unless you are wanting to do both the individual room and the combined... then you are stuck with calculating it in a schedule.
Ling.
Unless you are wanting to do both the individual room and the combined... then you are stuck with calculating it in a schedule.
Ling.
AC22-28 AUS 3110 | Help Those Help You - Add a Signature |
Self-taught, bend it till it breaks | Creating a Thread |
Win11 | i9 10850K | 64GB | RX6600 | Win11 | R5 2600 | 16GB | GTX1660 |
2 REPLIES 2
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
2020-02-05 08:56 AM
2020-02-05
08:56 AM
Hello T.S.,
To calculate the combined area of both rooms :
- do a schedule into you are able to add both to show only the result
- do a single zone and call the calculated area which substract the wall between
- do a single zone with the thinnest link you can do between both
To calculate the combined area of both rooms :
- do a schedule into you are able to add both to show only the result
- do a single zone and call the calculated area which substract the wall between
- do a single zone with the thinnest link you can do between both
Christophe - FRANCE
Archicad Designer and Teacher
Archicad 15 to 28 FRA FULL
OS 13 Ventura - MacBook Pro M2 max- 32Go RAM
"Quality is never an accident ; it's always the result of an intelligent effort" John Ruskin
Archicad Designer and Teacher
Archicad 15 to 28 FRA FULL
OS 13 Ventura - MacBook Pro M2 max- 32Go RAM
"Quality is never an accident ; it's always the result of an intelligent effort" John Ruskin
Solution

Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
2020-02-06 02:20 AM
2020-02-06
02:20 AM
Select your dividing wall and change its Relation to Zones to "Reduce Zone Areas Only" .
Unless you are wanting to do both the individual room and the combined... then you are stuck with calculating it in a schedule.
Ling.
Unless you are wanting to do both the individual room and the combined... then you are stuck with calculating it in a schedule.
Ling.
AC22-28 AUS 3110 | Help Those Help You - Add a Signature |
Self-taught, bend it till it breaks | Creating a Thread |
Win11 | i9 10850K | 64GB | RX6600 | Win11 | R5 2600 | 16GB | GTX1660 |