Hi there is a bug intersecting composite walls and columns (see attach)
Archicad-27.2.1-Hotfix-FRA-INTEL (5030) Operating system used: Mac
Intel-based Monterey 12.7.4
Hi, maybe you tape the 33D cut plane " short key and have a vertical cut
plane set. Go to the "View / Elements in 3D view / 3D cutting" to verify
if it is set on. When 3D cutting is on, to delete a cut plane be sure
they are displayed in "View / Elem...
Hi henrysaxby, In my template, I have created camera courses for each
significant hour I need, each course containing 12 cameras for each
month in order. You can also create views from those cameras if you need
to place them on a layout. Creating the...
Hi Miel, You're right your problem comes from the different story's
height between the two files. In this case, in the module file, set the
walls to "Symbolic cut" or "Contour only" depending on how they should
appear.
Hi Alecsander, You can have multiple design options and design options
combos set in your module and choose or change those that will be used
by the place module in the link options palette of the selected module.
You can also create design options ...
