Complex profile problem; incorrect floorplan look

[Anonymous]

Please take a look at the attached pdf file.
I would be thankful for any solution for this problem but I think it doesn't exist (I mean the solution)

Best regards

Peter

[James B]

The pen of end lines in Floor Plan are set in the Profile Manager palette. Select the fill and under the Component - Selected panel, below the surface setting you can set the end line pen.

[Anonymous]

Hi,
thank you for your comment but the real problem is not about the line weight of the wall-end. My problem is that the line weight of the core ( which is set stronger in the Profile Manager than the other parts) is incorrect on floorplan ( only one side of the core is stronger, the other is lighter, as if it were covered by the other fills- changing the display order doesn't help).

[James B]

It looks like your floor plan is using a different scale than your section.

[Anonymous]

Unfortunatelly this is independent of the scale.Here is another JPG just to demonstrate what I mean.

[Anonymous]

I missed the attachment.

[Anonymous]

Here is another version of the same floorplan-detail after that I pulled away the finish layers from the core in the Profile Manager. Amy other option is the same