Corner window on two walls with different thicknesses

[Ahmed_K]

Hello, 

i think it's a strange behaviour from Archicad as i remember i did this before correctly, 

Placing corner windows on 2 diffentent walls causes problems in the corner frame, it won't connect even when i check " different wall thickness " and i add the thickness 

Any soltion please ? 

[Steve Jepson]

it seems to work for me in 25 as expected. 

try the other Corner ?  

Also, both Window and Walls can be set to Projected instead of Symbolic - ?

[Ahmed_K]

Thanks steve for the reply,

It works for walls with the same thickness, but not with different wall thicknesses, Archicad 23

[Steve Jepson]

Like this -  but does not work with 23.  I got it.  

[Ahmed_K]

Does this was mentioned in the new features of Archicad 25?

[Steve Jepson]

It works for me in 23 as well.   

It could be that his happens with a certain window type.

Something is not quite right. I have been able to generate the anomies a couple of times but I didn't notice it time to find what it was using Ctrl-z.   What window are you using ?

I was able to get it to look correct using some the Bring To Front tool and changed settings to Projected rather than Symbol.  I think it has more to do with getting things to rebuild than the settings changes ? 

[Ahmed_K]

I glt it,

It works only when reveal is set to 0, then, i should place my windows on the inner face, 

[Lingwisyer]

https://community.graphisoft.com/t5/Wishes-forum/Corner-Window-Differing-Reveal-Depth/m-p/296199