About Paalanen

Paalanen · 2025-11-18

Hello all, Hope you're pushing GDL towards to it's potential. Here's my issue at the moment. Why are my edges black? E.g. with SYMB_MAT this does not happen. Does the material definition need additional parameters for the cprism_{2} edges? Kind regards, Paalanen define mater...

Paalanen · 2024-12-13

Hello everybody, Might there be a way to limit vertical placement of an opening to e.g. the heights of brick layers (,so as to not having to "cut" any bricks)? I.e. restricting the vertical movement of the opening to a certain "step value". It seems like AC_Sill_To_Curr_Stor...

Paalanen · 2024-06-27

Hello all,Anybody know if there's such a request or similar command to use with an aperture gdl object?Hope you all have a great summer,Paalanen

Paalanen · 2024-05-16

Hello everybody,Does anybody know if there's a way to correctly enable the "Override Object's Attributes" when using different parameters for cut and projected lines and fills with project2{4}?Kind regards,Péter

Paalanen · 2024-04-19

Hello everybody, I'm about to capitulate on an issue I've been banging my head against. The projected parts of an "isected" body isn't drawn completely using the project2{4} command. Would be greatful for any thoughts.All the best,Péter3d script: group "1" block 1,1,1 endgro...

Paalanen · 2025-11-18

Hello runxel,Thanks a lot indeed!! Will try cprism_{4}...

Paalanen · 2024-12-13

Yes, the height I can restrict. Would've been good to also restrict the placement.Thank you so much for your quick reply!!! Kind regards,Paalanen

Paalanen · 2024-06-30

Hello Barry,Here's a screenshot to show what I was after: Hotspots / aperture shape based on logheight and starting logheight. I'm sure those will be derived from the add-on, so no more dabbling in gdl for that purpose.Thank you very much for the replys! /Péter

Paalanen · 2024-06-30

Looks great!

Paalanen · 2024-06-28

Thank you very much for your reply. I'm working with an addon called ArchiLogs and the opening sometimes takes it's shape from the log height and is thus dependent on, apart from the log height, whether the wall starts with half a log or a full one. I presume this data must ...

User Statistics

User activity

Side materials for cprism_{2}

Aperture Placement

Request Whether Log Wall Starts with Half Log or Not

Override Object's Attributes with project2{4}

isectgroup & project2{4}

Betreff: Side materials for cprism_{2}

Re: Aperture Placement

Re: Request Whether Log Wall Starts with Half Log or Not

Re: Request Whether Log Wall Starts with Half Log or Not

Re: Request Whether Log Wall Starts with Half Log or Not