cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 
Document & Visualize forum

Complex profiles display in floor plan

Anonymous
Not applicable
Hi. I have problem with display complex profiles in floor plan.

For example: I draw one complex profile beam/strip foundation (e.g. Precast Inverted Tee), but in floor plan that beam is displayed with three lines, nevertheless what Floor Plan and Show Projection combination I choose.

Under the complex beam is "dumb" inverted tee created from two beams and it is displayed correctly.

Does someone have solution for that problem?
1 ACCEPTED SOLUTION

Solution
Lingwisyer
Champion
If you use a wall instead, your profile will show. The current beam tool does not use a projection of the profile and instead just draws an outline with a toggled centre line hence what you have seen.



Ling.
AC22-23 AUS 7000
Self-taught, bend it till it breaks.
Win10 | E5620 x 2 | 24GB | K2200 RIP PSU
Win10 | R5 2600 | 16GB | GTX1660

View solution in original post

2 REPLIES 2

Solution
Lingwisyer
Champion
If you use a wall instead, your profile will show. The current beam tool does not use a projection of the profile and instead just draws an outline with a toggled centre line hence what you have seen.



Ling.
AC22-23 AUS 7000
Self-taught, bend it till it breaks.
Win10 | E5620 x 2 | 24GB | K2200 RIP PSU
Win10 | R5 2600 | 16GB | GTX1660

Anonymous
Not applicable
Solved. Thank you!

Still looking?

Browse more topics

Back to forum

See latest solutions

Accepted solutions

Start a new discussion!