About dhnguyen

dhnguyen · 2023-05-04

I made a copy of the original file to and worked in the copied file.I wanted to bring some walls from the original file into my newly copied file and noticed that the walls don't land on the same spot when I Paste to Original Location.This has happen...

dhnguyen · 2023-04-03

In my existing and proposed elevation views, the cover fill for my brick and roof material is set to the lightest penweight possible, and they're showing up fine as I set them to be. However, in my Proposed Section cut view seeing the elevation beyon...

dhnguyen · 2023-03-30

I made a copy of the original file to and worked in the copied file.I wanted to bring some walls from the original file into my newly copied file and noticed that the walls don't land on the same spot when I Paste to Original Location.This has happen...

dhnguyen · 2023-03-28

I want to learn how to build a suspended ceiling with metal stud framing so what when I create a section cut, I'm seeing the suspended vertical stud wall framing at x" on center instead of just a few horizontal lines depicting the ceiling material an...

dhnguyen · 2023-01-27

I have several questions.Both of these section views have the same pen set in layout space and the color & transparency is defined by the same pen set, why does 1 view have the walls showing up darker than the other?The one on the left viewed just fi...

dhnguyen · 2023-05-17

Yes, I can share the file.File 1 is the original file and File 2 is the file where I made a copy.If you go to the first floor plan of both files and copy and paste to the original coordinate, it doesn't line up. https://drive.google.com/drive/folders...

dhnguyen · 2023-04-04

Thank you so much, I wasn't aware of this setting. It's not that one but I tested out several variations and this one did the trick.

dhnguyen · 2023-01-22

I also have the exact same problem, has any of you been able to solve it yet?

dhnguyen · 2023-01-21

Hi Marc, This was done using the Existing and Proposed Renovation Filter setting. I usually don't duplicate the walls to put them on the demo layer, I thought it would solve the problem it doesn't. I even tried offsetting the bottom of the 2nd floor ...

dhnguyen · 2022-09-23

perfect, thank you!

User Statistics

User activity

Plan Origin

Cover fill elevation in section view is too dark

Project Origin has changed

building a supended ceiling with stud

Pen Set Color Problem

Re: Plan Origin

Re: Cover fill elevation in section view is too dark

Re: All fills from sections turn white on layout

Re: Remove a low roof and build new walls above it

Re: Cross Selection Not Working Anymore