wrong insulation connection

[Anonymous]

Hi. The angled wall has insulation and must stop to the column. But as you can see in the attached pdf the insulation pass through the column. Any ideas;

[Erwin Edel]

The three walls make a connection, the column just sits 'on top' of it, as it were. The wall connection gets processed first, I think.

You could:
- change the material priority of the masonry or insulation, to stop the insulation going through with the wall connections
- draw the column with a wall, breaking up the connection of the 3 walls, by putting the 4th bit of wall in between
- patch over the unwanted insulation with a 2d fill

[Anonymous]

Thank you!!!