cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 
Document & Visualize forum

Forum Posts

Survey follow-up – Door/Window Detail Level

Dear Community, Many of you took part in our recent survey on “Detail Levels of doors and windows on a single drawing”: https://community.Graphisoft.com/t5/Document-Visualize-forum/Doors-amp-Windows-Detail-Levels-within-a-single-drawing-1-minute/m-p/...

Elevations display

I have exterior trim profiles on a project that is quite detailed; a couple of curves and overlaps of material. When generating the elevation at 1/4" scale the trim comes out as almost a solid line due to the number of changes in the face of the trim...

Missing layouts

After publishing the BIMx file with few layouts attached, I cannot see all the layouts ‘cause some are missing (they are on the list but without content). Also the 3D model seems to be missing (no preview) but with a double click it opens. Any hint?

Anonymous by Not applicable
  • 15749 Views
  • 8 replies
  • 0 likes

Zone Stamp = always centered on zone?

Is it possible to have a zone stamp always centered vertically and horizontally inside the zone? This is possible with the "Area Text" in Fill...and its such a nice feature when doing quick zone sketches. Kind Regards

joimagg by Contributor
  • 346 Views
  • 1 replies
  • 0 likes

Archicad Start 2020 - Graphic Overrides

Does anyone know how to create new Graphic Override Rules in AC Start 2020? The location for this in other versions is Document - Graphic Overrides - Graphic Override Rules but AC SE 2020 doesn't appear to have this last command.

Planit by Newcomer
  • 1531 Views
  • 13 replies
  • 0 likes

AC23 Stair display up/down text?

Hi Folks, I'm struggling with getting the stair to display its text in the desired manner. Bottom of stair should have an arrow pointing up, on its home story. It ends with a break line. Top of stair on story above, the stair should have an arrow poi...

Anonymous by Not applicable
  • 705 Views
  • 3 replies
  • 0 likes

Resolved! Changing the default Element ID

Hi I would like to know if there is any way to change the default ID of Archicad objects. For example - right now every wall i build is given a unique ID (SW-881 ect.). I would like that every time I build a wall its ID will be WAL-001-FLR1 (Object N...

Anonymous by Not applicable
  • 9457 Views
  • 2 replies
  • 0 likes

Indoor Lamps not casting light in Cinerender

I'm trying to render an Indoor Lamp Only scene, but none of my lamps are casting light. The only visible lights are of the lightbulbs themselves. I tried adding an IES light and that one worked fine. The non-IES lamps are turned on on the light setti...