cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 
Design forum

Forum Posts

Component Level Design Workflows - Conversation & feedback

Hi All, Now in Archicad, most design and data are handled at the element level - assigning properties, using Graphic Overrides or setting renovation status are a few examples.To express design intent and extract data at a more detailed level, the com...

James B by Graphisoft
  • 7894 Views
  • 127 replies
  • 16 likes

Resolved! Bottom part of stair goes below floor

I have created a stair (AC19), but since the bottom part goes below the first step (instead of being flat), it is visible below the floor in elevation/section. How do I change this? I assume there's a setting somewhere, but I haven't found it. See sc...

Resolved! Wall hatching not showing

Hi eveyone!My wall hatching from my previous save is showing but when I draw a new wall, it doenst show any hatching. I check the model view settings and make sure the wall layer is turned on too, but the hatching is still not showing. Does anyone ha...

Screenshot (377).png
shenni by Contributor
  • 266 Views
  • 4 replies
  • 0 likes

Resolved! AC26: Custom Fill

AC26Windows 10 I have customized a fill, but it will not show on the material i have assigned it. It will only follow the screen only pattern.

SheenaMarieTamidle_0-1670570132948.png ts_01.png ts_02.png ts_03.png

3D view glitch

Hello! I have had a problem for a couple of days when working in the 3D view the screen randomly goes to a drawing for a second and then comes back to the 3D view. This happens very often and it bothers my workflow a lot. Are there some suggestions o...

eliiseh by Participant
  • 166 Views
  • 0 replies
  • 0 likes

AC25 Composite Wall wrapped ending

Hi, I'm having some trouble replicating a wall ending in Archicad...This is what I'm looking too achieve.And this is the closest I can make it...Please help me understand these wall endings

Untitled.png Untitled2.png

Resolved! Export Door Leaf

I don't know why I'm not figuring this out, but I cannot figure out how to export a custom door leaf. I created a custom leaf in one project and wish to use it in another...how can I export it from one project to another? Thank you!

EH21 by Booster
  • 274 Views
  • 6 replies
  • 0 likes

Resolved! Creating a roof to sit on walls at different heights

Hey I have a design of a small home on a sloping site where the floor and walls step up about 1m on the high side of the site. I want to create a single roof structure that covers both sides of the home. How can I, or is it even possible, to set the ...

PHIL7 by Contributor
  • 286 Views
  • 4 replies
  • 0 likes

Resolved! Editing WoFIV schedules in German version of Archicad.

There are WoFIV schedules in German version of Archicad, designed for calculation of the living space area according to German regualtions: They are some limitations though with respect to what extend it's possible to edit those schedules. Therefore ...

IsaacNewton_0-1670420848970.png IsaacNewton_1-1670421105640.png IsaacNewton_2-1670421269772.png IsaacNewton_0-1670507152702.png

Resolved! Filter zones by zone category in the zone schedule

Good time of the day, gentlemen I'm trying to create a schedule with zones that belong only to one schedule. Therefore, I'm trying to filter them by that paramenter. The problem is that this parameter can be found only in the "fields" section of the ...

IsaacNewton_0-1670419736940.png IsaacNewton_1-1670419878259.png