Document articles
cancel
Showing results for 
Search instead for 
Did you mean: 

Articles

Design Concept Presentation with Archicad

In this article we want to provide some tips and tricks to supplement or enhance architectural drawings. Architects need enhanced architectural drawings to be able to represent their design concept efficiently. Of course, you have to start with a pro...

wp-content_uploads_archicad-23-reference-guide_130_userinterfacedialogboxes_ParallelProjSets.png wp-content_uploads_2020_01_custom_axonometrx.png wp-content_uploads_2020_01_Top_Axonometry.png wp-content_uploads_2020_01_Isometric_Axonometry.png
apolgar by Graphisoft
  • 168 Views
  • 0 comments
  • 0 likes

How to Lock/Unlock Elements in ARCHICAD

Types of Element Locking Layer - When a layer is locked, all elements on the layer are locked. Individually - Elements can be individually locked independent from the locking status of their layer. How to Identify Locked Elements Locked elements cann...

How to display hidden Mesh lines on a section

How do we make a mesh cut line in section dashed? - asked by nickATA on ARCHICAD-TALK One of our users posted this question on ARCHICAD-TALK about how to make an uncut line of a Mesh dashed on a section. The situation described was with two meshes (o...

Trace & Reference Palette

Trace image not aligning across Stories - asked by John on ARCHICAD-TALK Sometimes we can run into issues with Trace & Reference: the ghost drawing is shifted, not aligning with the content of the stories above certain elements missing from the ghost...

Floor Plan Display with Overhead

ARCHICAD construction elements on a floor plan usually can have 3 different displays. projectionprojection with overheadcut only Using Projection with overhead is a similar look for different element types: There are a few exceptions though, having a...

Creating Custom Plotter Drivers

Introduction There is a large number of .xml files called plotter drivers shipped with ARCHICAD. They are located in a folder named PlotWare within the main folder of ARCHICAD. These files contain some basic information (e.g. maximum paper size, size...

Display Order

When drawing a Project with ARCHICAD, overlapping elements will be drawn according to a specified stacking order. About Drawing Index When using the Bring Forward/ Bring to Front/ Send Backward/ Send to Back commands, ARCHICAD uses an internal index ...

automata by Graphisoft
  • 63 Views
  • 0 comments
  • 0 likes

Difference between Drawing and Figure Tools

This document was prepared in response to the ARCHICAD-Talk question of when to use the Figure Tool rather than the Drawing Tool. Drawing Tool Figure Tool What it inserts ARCHICAD views (internal or external), external drawings (DWG, DXF, DWF, DGN, P...

automata by Graphisoft
  • 28 Views
  • 0 comments
  • 0 likes
Labels
Top Contributors