Documentation

Big project on Large Paper Vs Small Scale Layouts Vs using Matchlines

I have a large footprint project. The building is maximum X-Y dimensions are 180' by 225'. To get it to fit on my standard 24x36 sheet of paper I need the drawing to be at a 3/32" to 1'-0" scale. At a 36X48 paper size size my scale is 3/16" = 1'-0" =...

Mirroring Elevation and note issues is there an easier way for standard plans?

TL;DR How do I stop notes and dims flipping out when mirroring elevations. Hi, I'm working on new Standard plans/template for a project builder and one of the problems that I've never fixed is the elevation notes flipping when the house/elevations ar...

3D Document for reflected ceiling

Hi. I´m having some troubles in 3D documents in the representation of walls. Please see the image attached. You'll see that I have 3 different types of wall fills and of course it looks confusing. I don't know that setting should I modify in order to...

line thickness

Hi, Please see image below: Both of these lines are designated to the same pen setting color (32), how come one has a different thickness than the other? For this color, I designated it to be .18mm thick. Whether I drew them as single line or polylin...

Resolved! Invisible line types

Is there a way to create invisible line types, when i try this, i Just make some new dashed line with minimal dash (,001) and a huge gap (10000,0), but, when i use this, at the corners of objects appear a point, at the middlepoints too...

Text

I have a question on text. When I make a text box - alignment left looks correct, alignment center the text does not center in the box and exceeds the text box on the right, alignment right the text mostly exceeds the text box on the right. The setti...

Changing the style of multiple dimensions lines

I'd like to change the style of multiple dimension lines in one of my projects. I've put a marquee around them, used the find and select tool to highlight the required dimensions but... ...if I go into settings to change the witness lines/marker styl...

Archicad20 Drawing won't fit on Layout

Hi, I have been using Archicad19 and have now started using Archicad20. I have drawn 1:100 scale floor plans and need to place onto an A3 layout. On Archicad 19 it would fit on oversize A3 but in 20 it it too big for the layout. Any ideas on how I ca...

Plot VS Printing - Screen Color Matching

Hi ppl I've bought a new plotter, HP Designjet T1530 PS and I've encountered a lot of problems trying to match screen colors and the impressed colors on paper. I'm using Archicad 21 an I've noticed differences in colors when using plot or printing. C...

Pen Sets overriding Background Fills from Master

Exactly as the title says. I have an object that has a background fill. I can place it on my layouts and it shows the fill correctly but when I place it in my masters and the layout reads from the master, the fill disappears. The fill appears when I ...

Graphisoft Community

Forum Posts

Big project on Large Paper Vs Small Scale Layouts Vs using Matchlines

Mirroring Elevation and note issues is there an easier way for standard plans?

3D Document for reflected ceiling

line thickness

Resolved! Invisible line types

Text

Changing the style of multiple dimensions lines

Archicad20 Drawing won't fit on Layout

Plot VS Printing - Screen Color Matching

Pen Sets overriding Background Fills from Master

Start a new conversation!

Fill in module Elevation not showing in master fil...

Show some window/door marker but not others in sam...

I want to remove a layer called A-Slab.

Zone Schedule

How to change all text and labels to a new font