Since yesterday June 5, 2023 I can no longer place drawings in layouts with Archicad versions earlier than 26. The files to be placed (jpg, png, pdf, etc.) show as ghosted when browsed. For some projects I want to continue working in earlier versions...
Normally when I make a copy of a drawing on a layout (say an existing site plan) and then link the drawing (using the "link to" command) to another view (say a new site plan) I expect the view to stay in the exact same place. but I am working on a pr...
1. Does Grid Bubble appear in Detail?This is a question I'm asking just in case. 2. Are vertical Range limited and infinite not separated in the cross section?If you lower the height of the vertical range limited grid in the section view, the other i...
I'm startled right nowI'm hoping you'll tell me I'm wrong.I am preparing a partial drawing, but the lines and dimensions are not linked.1. In the detail drawing, if the drawing is modified and then rebuilt, it is changed to a non-interlocking stupid ...
In the 3D view, what is the reason for the phenomenon that is visible only on the 27th floor but not on other floors? How should I handle the small lines that appear when switching to 3D Document? This phenomenon also appears when the column at the b...
Trying to put a text in front of the dimension.But the only way I know is to select and input only the text of the dimension.1. Can't I make it a favorite with text?2. Isn't there a way to select only characters with the ctrl+F method?3. How are you ...
Dear Communitiy, I have been working with ArchiCAD since version 6.0, and since we can move objects and overlapping surfaces in sections, I've only now encountered a problem in v26. In sections, the overlapping surfaces of walls, girders or slabs do ...
How do adjust the viewpoint for the Interior Elevations to automatically come in at 1/2" = 1'-0" instead of 3/8" = 1'-0"? I tried changing the floor plan to 1/2" = 1'-0" and the Interior Elevations still come in at 3/8"=1'-0". I thought I could set t...
When I place a zone label, I also get a "separate" wall label that I can delete. Not sure how to restore the zone label.
I want to create only the floor plan of building 1 from the floor plan of building 2.How do you do it? I'm trying to express the floor plan work, such as the dimensions of the building below.To work on dimensions, etc., the above move overlaps with t...
