Is the an option to assign a thicker line weight to the corners of walls
in elevation? I'm currently drawing in the lines as shown in the right
hand image. Would be great if this could be automated somehow. Cheers
Hi, I would like to know if I can change the line work from solid to
broken lines in an elevation to indicate that those elements are below
ground level. I have attached a drawing to help explain. Any advice
appreciated. Cheers Scott
Hello, I have Archicad 19 and I am un able to find option to create my
own Zone Stamp and Zone so I can put it in my Favorites.. Is there any
way? For example every time I make zone I have to edit zone fills, zone
stamp text, framing etc one by one a...
How do you get the window marker to show on the elevation of the
building for AC 19? For AC 18 you check the "Label Elements" box and
select a label type (see image), but AC 19 does not have the "Label
Elements" box anymore.
see attached. we need to indicate that "end" line condition to
distinguish when "new" meets "existing". I cannot change the
justification of the wall planes either...they MUST have the same
reference line (the framing skin).
My dimensions in the drawing file do not reproduce exactly in the layout
file. For example, I see 5'-6" in the drawing and 5'- 5 63/64" in the
layout. This happens only on a small subset of dimensions, not every
dimension. Is this related to changing...
Hi, I have been manually adding floor and ceiling levels to my
elevations for quite some time. I know Archicad can do this
automatically using the story display option in the elevation section
settings, but I find the boundary offset option difficult...
Hello guys, I´m having a problem with my model. I´ve modeled an element
using the morph tools and now i´m having problems to subtract a wall
from it, or better, to cut the top of the wall to the bottom face of my
element. The element is the green one...