Document & Visualize forum

Visualization & visual language - Conversation & feedback

Greetings Everybody, Visualization and the visual language as a whole is a crucial phenomena when we communicate our ideas to the clients. Should that be vectorial, artistic, non-realistic, photo-realistic, 2D or 3D from classic quick shaded represen...

Reveal Edge Different in Section / Elevation / Plan

How Do I fix this: I have a window in my exterior wall. In plan it looks correct in the wall where I set it. When I look at that window in section, it is offset from the wall and looks odd and unusable dangling in mid air offset from the wall. This a...

Roof eave line not showing when placed on layout

Hi, roof shows the eave line when I edit it, but when I placed it on layout, the eave line disappear. Any idea? Also, I am having trouble with auto snap (dimension tool on walls) I checked automatically dimension walls and slabs and chose outer faces...

vector font (SHX) a bad idea?

Hello, We are in the midst of doing our first project on Archicad 24. We have been using Arial font up to this point as we are trying to do as little customization as possible on this first go around. Eventually, though, we would like to use a font t...

Level Dimension Rotated in different scale

Hi, I have a level dimension in plan view. It is rotated vertically when I change the view scale from 1:100 to 1:250. Does anyone know what is wrong? Thank you

Dimensioning on a section

Hi all, is it possible to make a dimensioning on a section including a dash-dot dimension line like the example below?

Custom associative core dimension text position defaults when elements move

Hi everyone, This is what's bugging me a little. I pick dimension tool and set it to "Automatically dimension walls and slabs", check"Outer faces" and "Core faces". Then I place an associative dimension on walls, picking their sides, so that the wall...

Resolved! Stair Break Numbering

Hi all, I have overlapping stairs of which I have set Below / Above Break Mark: Visible. This limits how much of the stair is drawn and the numbering coincides. The issue is that the the cut treads are numbered for both stairs resulting in an overlap...

Wrong shade of grey being plotted in 3D Document

Hi, I have a 3D document with shadows turned on. The shade of grey is a nice light grey. However when I plot it, the shade of grey becomes very dark. I tried changing the grey to different colour, and that came out as seen on the screen. I tried chan...

All in one layout

Hello to all, I am wondering if there is a way to put all layouts in one single grided layout? actually I already can do that (grided master layout) but we can't put layout in the layout so I have to put my saved view points in that layout and I have...

PhotoRendering completely blue please help!!

Hi all, I am having trouble with photorendering certain views that I have set up. Recently, for reasons I do not know why particular views I have set up and rendered a thousand times now appear blue and green in the viewpoint and when I render. Some ...

Graphisoft Community

Forum Posts

Visualization & visual language - Conversation & feedback

Reveal Edge Different in Section / Elevation / Plan

Roof eave line not showing when placed on layout

vector font (SHX) a bad idea?

Level Dimension Rotated in different scale

Dimensioning on a section

Custom associative core dimension text position defaults when elements move

Resolved! Stair Break Numbering

Wrong shade of grey being plotted in 3D Document

All in one layout

PhotoRendering completely blue please help!!

Start a new conversation!

Layout consistency for plans (or larger drawings, ...

Window Lists - how to save multiple Views using di...

Building Material filter in 3D

SECTION LINE & GRID ELEMENTS

Downloading a texture from “BIM Object” to place i...