Document & Visualize forum
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Resolved! Objects cut by Floor plan cut plane

Hello, I'm documenting some kitchens and I was wondering, is there a way to have the floor plan cut plane to "cut" through objects and not see them as if standing above?In "normal plans" you don't want to, as it is a representation and all you care f...

cut.png

Resolved! Door Schedule Wall Thickness

Does anybody know why the "wall thickness" in my door schedule is rounding up to 4" and 6" instead of showing up as 3 1/2" and 5 1/2"? My dimensioning settings are all set to round to nearest 1/8". Or, is there a better way to indicate jamb depth for...

Screen Shot 2021-10-11 at 1.35.16 PM.png
EH21 by Booster
  • 69 Views
  • 3 replies
  • 0 likes

Cabinet doors obscure shelves

I sometimes need to show partially opened cabinet doors in internal elevations but find that thrse are partially obscured by the doors, creating very untidy and potentially confusing views. I seem to remember being able to show obscured shelves behin...

KeesW by Contributor
  • 39 Views
  • 0 replies
  • 0 likes

Resolved! Revision History Object

I'm new to using the Revision History Object. I have added it to the master plan layout, have linked all changed to the appropriate wall etc but changes will not show in this table, even though I can see them in the project Indexes change list. Have ...

Resolved! Elevation of a roof

Hello, I am trying to do an elevation of a pitched roof. Is it possible when you are in an elevation to add an elevation viewpoint with the same angle as the pitched roof? Why is it possible to add an elevation viewpoint when you are in an elevation ...

latitude & longitude

Latitude and Longitude input not accepted: example 9.79744500 not accepted and 9.49744500 substituted, a similar problem with longitude.SOLUTION:switch button to digital but do not type in number as that will not work. Type the digital number in Word...

EXPODTL by Contributor
  • 31 Views
  • 0 replies
  • 0 likes