Modeling
About Archicad's design tools, element connections, modeling concepts, etc.

Forum Posts

Changing line colour

Some things have always bugged me with Archicad. For example, I have a 2D line used construction lines which need to be a different colour from other lines so that they can be distinguished. I want to use red for this line and have this selected. Eas...

Why not red.PNG
KeesW by Advocate
  • 409 Views
  • 3 replies
  • 0 likes

Touching elements cut line weight is not showing up in sections

Hello, This topic was discussed four years ago (Overlapping Mesh Cut Lines in Sections...), but I am really struggling with this issue now, especially since it used to work in my previous templates AND in Version 24. Please see attached screenshots. ...

6 elements, no SEO.PNG 6 elements, with SEO.PNG KingaW_2-1667225030041.png
KingaW by Contributor
  • 203 Views
  • 0 replies
  • 0 likes

Poor drawing graphics in version 26

The display of drawings has become much worse compared to version 25.Attached are comparative screenshots of versions 25 and 26 in different versions of line widths.The line thicknesses in version 26 are coarser, blurrier and thicker. In version 25, ...

BoNgO by Booster
  • 3651 Views
  • 17 replies
  • 0 likes

Resolved! Solid Element Operations delete operator

Hello. I want to change the terrain with solid element operations, using a slab at a certain level and using upward extrusion. Problem is, if I delete de operator slab, the terrain goes back to normal. I understand this is probably expected, but is t...

Jeliel_0-1666971088223.png Jeliel_1-1666971101239.png
Jeliel by Participant
  • 527 Views
  • 2 replies
  • 0 likes

Resolved! Fan stairs

Is it possible to create stairs like this in Archicad 25?

fan_stairs.JPG Photo 17.10.2022., 12 13 17.jpg
sonjica by Contributor
  • 781 Views
  • 7 replies
  • 0 likes

Curtain Wall not dividing correctly

I have created a curtain wall for a glass façade. I have used "number of divisions" setting so that the wall is correctly divided in equal panels, and I have an invisible frame in between the panels of 1 cm.The vertical division works correctly - the...

Helm by Participant
  • 277 Views
  • 0 replies
  • 0 likes

Resolved! Transfer multi story building into new Archicad file

Hi all. I have been working on a multi level building and now want to copy into a new file. I use the thick marquee to copy all stories, however only 1 story is transferred? Appreciate any help!Thanks

GREJX by Contributor
  • 513 Views
  • 5 replies
  • 0 likes