Document & Visualize forum
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Change template

I am using my own template and have nearly finished some working drawings with it. However, I want to change the template to the standard Australian template for the existing drawings. Any sugestions to make this easier would be appreciated.

KeesW by Contributor
  • 112 Views
  • 2 replies
  • 0 likes

Some downloaded objects show up pink

Fairly simple question here: sometimes when I download a library object, it shows up pink in the floor plan. I've checked all of the floor plan display settings on the object and nothing implies that it should show up pink. AC's library is somewhat l...

Resolved! Wall projecting on floor above

Hi all, I'm waniting to get the walls showing above on a set of plans. I've setup the walls to have all the correct settings. Now, the wall with the red arrow to it is the problem, i want to dispaly the frame & brick. same as the wall adjacent to it....

tomyg_1-1633388731333.png tomyg_0-1633388700253.png tomyg_2-1633388892965.png
tomyg by Booster
  • 126 Views
  • 2 replies
  • 0 likes

Resolved! assistance w/ SEO wall displaying on floor plan?

In plan, I'm expecting to see the wall as solid below 4' & dashed above that datum. However, it doesn't seem to be doing that...what should I look at to rectify this?I've rebuilt it several times & I get the same thing. I'm guessing there's a setting...

SEO-WALL-01.png SEO-WALL-02.png SEO-WALL-03.png
proto by Booster
  • 465 Views
  • 19 replies
  • 0 likes

Pen sets in AC 24 templates, INT, SPA

I am looking at the pen sets in the AC 24 SPA template (the “functional” pens), but they look to me like all model pen sets —I can't see how any of them can make sense for drawings, including the ones that are set by default for the few drawings in t...

Ignacio by Enthusiast
  • 119 Views
  • 2 replies
  • 0 likes

Resolved! Angle dimension tool AC25 bug

Archicad 25 build 3011: Can't use decimal degrees to dimension an angle using the angle dimension tool. "Project Preferences" for angle dimensions in "decimal degrees" gives erroneous choice of only fractions (1/2, 1/4, 1/8 etc.), not number of decim...

Start a new conversation!