cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 
Document & Visualize forum

Forum Posts

Elevation level Display

Hi, I have been manually adding floor and ceiling levels to my elevations for quite some time. I know Archicad can do this automatically using the story display option in the elevation section settings, but I find the boundary offset option difficult...

Anonymous by Not applicable
  • 1906 Views
  • 4 replies
  • 0 likes

Cutting a Wall from a Morph

Hello guys, I´m having a problem with my model. I´ve modeled an element using the morph tools and now i´m having problems to subtract a wall from it, or better, to cut the top of the wall to the bottom face of my element. The element is the green one...

Captura-de-tela-2015-09-12-20.22.jpg
Anonymous by Not applicable
  • 4387 Views
  • 3 replies
  • 0 likes

Beam Documentation

Does anyone have a reasonable way to display a trellis made of beams 1. On a typical reflected ceiling plan and 2. On the roof or floor plan of the story above If the beam layer is included in the both Construction Plan and Reflected Ceiling layer co...

Anonymous by Not applicable
  • 1174 Views
  • 1 replies
  • 0 likes

Labels

It seems that ArchiCAD 19 has an option to link notes to a specific element, fill, etc. Although this can be very handy at some times, it is also a disaster at others. Is there a way to turn this off? I am finding that as I copy and paste notes from ...

TracyGA by Contributor
  • 479 Views
  • 0 replies
  • 0 likes

Section markers in different sizes stories

Hello, That´s my first post but i´m a lurker from a long time. I´ve made some research before posting this and i didn´t found any answers. I have a two-story house and the second story plan is much smaller then the first one. This causes a "problem":...

Anonymous by Not applicable
  • 2293 Views
  • 5 replies
  • 0 likes

Surface lighting

Take a closer look at the light setting of this image module , if you ask me how I arrive at it , I, ll tell you that I don,t know why because I try repeatedly to apply the same settings to other drawings but never came up the same way. Is this a tem...

Anonymous by Not applicable
  • 1377 Views
  • 1 replies
  • 0 likes

publishing errors

Ever since I started using 19, occasionally when I try to publish a series of Layouts, the last layout fails to publish. when I click on it I get the generic message "item cannot be published. may be in use by another application or person". I try to...

Screen Shot 2015-09-05 at 2.15.54 PM.png