cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Showing results for 
Search instead for 
Did you mean: 
Design forum

Forum Posts

Component Level Design Workflows - Conversation & feedback

Hi All, Now in Archicad, most design and data are handled at the element level - assigning properties, using Graphic Overrides or setting renovation status are a few examples.To express design intent and extract data at a more detailed level, the com...

James B by Graphisoft
  • 7596 Views
  • 126 replies
  • 16 likes

Objects and Rotation

Is there a darn good reason out there to explain that when i create a new object, we still do not have a built in ability to rotate the object in any direction? Seriously - I really want to know why after a 1000 years we still can not rotate custom o...

gdford by Advisor
  • 419 Views
  • 3 replies
  • 3 likes

Resolved! Lines in composite walls

Is there a way to get rid of the extra material line where my composite walls join(see image)? This is mainly an issue where my exteriors meet my interiors. My material intersection settings are in the correct priority. Last project I made a fill and...

JKL by Contributor
  • 1697 Views
  • 14 replies
  • 0 likes

Morph or Object

If i build something out of a one piece morph and I need to place several hundreds of these identical morph elements, is it better for Archicad to turn the morph element into an object and place the objects, or is it about the same difference to just...

gdford by Advisor
  • 513 Views
  • 6 replies
  • 0 likes

Changing Label position based on it's parameter.

I am trying to create a label which changes it's position based on the co-ordinate values (global) defined in it's parameter. For example, if the label is in a random position with initial parameters:Global_X=1Global_Y=2 and I change it to Global_X=3...

Eshanta by Contributor
  • 329 Views
  • 4 replies
  • 0 likes

Resolved! Wall extrusion edit for french provincial look

I have a project that contains a wall with rendered lines as shown below. I did this a long time ago and I cant remember how it was done. When I move the wall the lines dont follow it and from memory it seems like the cuts are separate from the wall....

jagber_0-1652407114596.png jagber_0-1652407311557.png
jagber by Contributor
  • 453 Views
  • 7 replies
  • 0 likes

PARAM-O Reference Guides/Tutorials?

I've been creating and modifying GDL objects for my firm for a couple of years now and have recently been tasked with checking out the new PARAM-O tool. After playing around with it, I think this could be a great tool for quick 3D objects or more com...

deactivating Offset

hello there I'm new user of Archicad 24 ,I have a problem of how to deactivate the offset settings because I'm trying to draw wall or whatever and they are put in position that I don't want.I'm looking forwad to you help .Thank you in advance

Josh1 by Beginner
  • 251 Views
  • 4 replies
  • 0 likes

Resolved! Wall finish extending beyond wall

Can anyone tell me why my wall finish goes pass the edge? The walls are intersected, the issue is resolved when I connect my foundation walls but then those walls project off the edge aswell.    

image.jpg image.jpg
Kodi by Contributor
  • 454 Views
  • 1 replies
  • 0 likes

Cold Room Doors - scheduling & modelling

in my time here, our office have gone through 2 projects that require cold room doors that require them to be modelled & scheduled. these are typically the same material/composition as the thick insulated panel walls that surround a space which requi...

GerryLeonor_0-1652322337048.png

Reporting Bugs

Who would have thought in 2022, that Graphisoft will only accept reports of bugs in AC 25 if you are an existing subscription holder (or whatever it's called in various countries)? I have started to use AC 25 for a month now and reported 4 confirmed ...