Libraries & objects
About Archicad and BIMcloud libraries, their management and migration, objects and other library parts, etc.

Forum Posts

'W Fixed 16' Window glitch

This would appear to be a rather esoteric issue, but maybe not if someone is trying (like me) to create a very simple kind of window appearance. I usually try to use the 'W Fixed' window library part to accomplish this. The issue is that when the sas...

W Fixed 16.png
Anonymous by Not applicable
  • 1572 Views
  • 0 replies
  • 0 likes

Fine Morphing

Pretty dumb, but couldn't resist posting the attached image from front page of today's San Francisco Chronicle. But this got my curiosity up, and in placing chairs together and converting to Morph, I learned I could dissect (move/replace) parts of th...

Anonymous by Not applicable
  • 1205 Views
  • 0 replies
  • 0 likes

Corner Window

Hi, I'm wondering whether anyone might be able to help me. I'm trying to create a frameless glass butt joint corner window with one of the windows having an angled head and the other having a horizontal, please see the attached image. Is there a way ...

Anonymous by Not applicable
  • 18133 Views
  • 8 replies
  • 0 likes

gdl objects with ifc parameters

Can anybody please help? I made some gdl objects that i used in a project. When i export the the model as IFC to Solibri, the parameter value dont show(hight and width). Should i do anything in the script?

Anonymous by Not applicable
  • 2943 Views
  • 2 replies
  • 0 likes

Password protection of 16 objects = a problem

The new password protection for objects created in version 16 is a nice option and provides much more security than the old "hide scripts". So I welcome that, but it does cause one slight problem that the old "hide scripts" didn't have. Now when you ...

Autotext Object

Hi, I am just wondering if there is an object that can reference a layout name (or any autotext for that matter) but only show the first character of that layout name? For example, if the layout name was ‘Ground Floor Plan’, the text object would onl...

Anonymous by Not applicable
  • 1579 Views
  • 2 replies
  • 0 likes

Frame Type 3, rebate Locked - ArchiCAD 16.

Has anyone else noticed this? The rebate width for all doors in the US ArchiCAD 16 library is locked to 1/2". The rebate is available for Frame Type 3. This annoys me an unreasonable amount. Why even have this option if we can't change it? I opened t...

Goodies 4204

Hi all, my Archicad version is 4204, while my Goodies version is 3271. Can the Goodies be upgraded? Has an upgraded Goodies library benn released? Thank you

Anonymous by Not applicable
  • 6428 Views
  • 10 replies
  • 0 likes

wallhole command & IFC format

I recently discovered that custom windows, If use wallhole command, been converted from the IFC format, in Tekla BIMsight, the wall openings disappear. Does anyone have dealt with this problem, how to solve?

Anonymous by Not applicable
  • 1951 Views
  • 2 replies
  • 0 likes

Section Marker Heads

Hi, is there a way to add or create new marker heads to the section tool? I'm not sure if this is the right place to ask (library parts/gdl) but I thought it could count as an object kind of topic. thanks!

Anonymous by Not applicable
  • 6736 Views
  • 5 replies
  • 0 likes

Picture for Interface script

Hello everyone, how can i save one picture for imported in interface script? For example i drew one triangle in the floor plan, place the view on layout and after that i save it as a pdf file. I can call the picture but the problem is that i have a w...

Cosminn by Contributor
  • 1257 Views
  • 1 replies
  • 0 likes

Railing being drawn with White Lines

I create a stair but the railing is drawn with white lines as shown in the picture. You can see the tread being covered over on the left side vs the right side's highlighted stair in the pic. And as you can see in the highlighted side the railing is ...

railing.jpg
Anonymous by Not applicable
  • 2056 Views
  • 2 replies
  • 0 likes

Turn radius

Hi, We are using an application on autocad for vehicle turning radiuses...it's called Pathplanner. However I want to investigate ArchiCAD alternatives and I've downloaded the turning radius objects from Cadimage ande they seem very good. Does anyone ...

Object ( tube, pipe) for sewage

It is available on BIMcomponents my object - pipe for sewage (Sewage Pipe_INT.gsm): https://bimcomponents.com/GSM/Details/13466 On Plan view it have Start and End Elevation dimensions, and a description text for type, diameter, lenght and slope of th...

Anonymous by Not applicable
  • 4168 Views
  • 0 replies
  • 0 likes

GDL 2D Object Editor

Hey guys I started drawing with ArchiCAD version 10 at University and then changed to AutoCAD cause of all the companies I worked with used it. Now I got sick of AutoCAD and want to change to ArchiCAD. My biggest Problem so far is the editing of 2D G...

Anonymous by Not applicable
  • 5054 Views
  • 2 replies
  • 0 likes

Wired Rail Object

Hey! I'm adding this rail object to my project and I chose the Rail Wired 02 15. This rail has this wires attached to the posts but not in the center od the posts, either on the outside or the inside part of the rail. It works perfectly when the rail...

Anonymous by Not applicable
  • 1402 Views
  • 0 replies
  • 0 likes

Window Niche Rectangular should follow curve of wall

Hi Archicad Gurus! I would like to ask something about the Wall Niche Rectangular 16 object under window tool. Is it possible to curve the niche both the outer edge of the wall and inner? Some ArchiCAD users say, it used to be possible in lower versi...

Anonymous by Not applicable
  • 3868 Views
  • 3 replies
  • 0 likes

Help with GLOB_CONTEXT

Hello everyone, i have a problem with this script, i want to create one rectangle in the floor plan but i need just a line in teh list, the problem is i can't control the hotspot from the floor plan, please help me . This is the 2D script: If GLOB_CO...

Cosminn by Contributor
  • 1571 Views
  • 2 replies
  • 0 likes

GDL IN/OUT and Arrays

Trying to update our zone GDL to automatically calculate occupancy numbers using use tables from the Building Code. I'm using an external text file to hold the table data so that it can be updated if the Building Code changes. !-- Getting NCC Table D...

How to set Working Units within a label

I modified a simple label to read a particular parameter of an object, in this case the mounting height. I am getting the label to read the correct height, however it is showing in meters rather than inches. So if the mounting height of the object is...

kevin b by Contributor
  • 2844 Views
  • 2 replies
  • 0 likes

Looking for a simple wall label

One where the optional line lenght is controlled by offset from the wall edges and not the middle of the wall....where the line should stay in the wall while movin the marker text...where it should be possible to add an angled line to the line that i...

Custom Components

I'm trying to make a custom door panel. I know how to do it, but when I go to save it, File->Librairies and Objects->Save Selection as Library Part.......I do not have the Save Selection As Library Part option. Its not in my drop down list. I reloade...

Anonymous by Not applicable
  • 9733 Views
  • 14 replies
  • 0 likes

Wall closure in sections

Hi, I am wondering if there is such an option as in the plan for doors and windows? So far can't make it happen in sections, please help me.

Anonymous by Not applicable
  • 1007 Views
  • 0 replies
  • 0 likes

Ceiling Editor object for design

Message from the Moderator: We have created this new thread for the discussion of the Ceiling Editor Object. There have been some questions regarding it as can be seen from the following few posts. From post 5 of this thread you can find the detailed...

Stretch Icon on Pet Palette disappiers

Hi, I ask a little help for the object that I make: it's a 3D PIPE for sewerage . There´s a little problem: with the hotspot on the starting point you can use Drag or Stretch, instead with the hotspot at the end point you can Stretch + change Directi...

Anonymous by Not applicable
  • 1297 Views
  • 0 replies
  • 0 likes

Library AC13 to AC16

Hello all, I was hoping someone could help me with a problem. I had Archicad 13 installed. I also installed archicad 16. Now both are installed. I created a project in Archicad 16 and added some objects from the library, as well as some BIM from the ...

Anonymous by Not applicable
  • 2227 Views
  • 3 replies
  • 0 likes

GUID and new dialog

Can anyone tell me something about the migration options in the object editing window? How does it work?

migration.png

Objects reading textfiles in PC and MAC

Hello Is there any gdl-command for an object to distinquish between platforms? My object should find a textfile but the path comands are different for PC and MAC. If the object knew the platform, it would be easy to use the right command depending on...

library parts missing on upgarde to archicad 16

I have used the trial of Archicad 16 but when i open some older version 15 files, a number of library parts were missing. Is there a way of getting them back.......? Any guidance on upgrading to Archicad 16 would be helpful. Thanks

Anonymous by Not applicable
  • 3846 Views
  • 3 replies
  • 0 likes

Old Library Part

Hi! an old friend of mine who was working with Archicad 6.5 passway and a open his file to give to the contractor Pdfs and is missing a part called RDSwing2D please if anybody can help me to find it. I really appreciate.

Anonymous by Not applicable
  • 1405 Views
  • 2 replies
  • 0 likes

View Orientation Parameter

I'm putting together a new drawing title for the office. It's all GDL scripted and working pretty well so far. I'm trying to go a step further and incorporate a north point into the title which references the Project North point. ArchiCAD has a stand...

North Point.jpg
LGreen by Booster
  • 3832 Views
  • 3 replies
  • 0 likes

Cricket

Anyone out there have any Cricket related objects or links to such objects? Thanks Nick

Anonymous by Not applicable
  • 801 Views
  • 0 replies
  • 0 likes

Geodetic structures

Geodetic structures. It is possible to subdivide the sphere in geodetic triangles in many ways. We can start with a different platonic bodies and the subdivision depend from the platonic body we choose. I present here some examples of geodetic sphere...

Anonymous by Not applicable
  • 1294 Views
  • 0 replies
  • 0 likes

Platonic bodies

In this post I expose the text 3D to build Platonic bodies, that are in 3D the equivalent shapes of regular polygons in 2D. 1) Tetrahedron !!Script 3D L=1 !side VERT l*sqr(3)/3, 0.0, 0.0 !#1A VERT -l*sqr(3)/6,-l/2, 0.0 !#2B VERT -l*sqr(3)/6,l/2, 0.0 ...

Anonymous by Not applicable
  • 3320 Views
  • 0 replies
  • 0 likes

Load objects, from the internet

Hello everyone, is there any chance to load my gsm objects from the internet? There are moments when i have to work in two offices, and i need to take my library with me, everytime.

Cosminn by Contributor
  • 1176 Views
  • 1 replies
  • 0 likes

Fit wood wall stud

Hi! everybody asking for help. How can I fit wood wall stud to composite wall core? (Refer to Image)

plan.png
Anonymous by Not applicable
  • 2083 Views
  • 2 replies
  • 0 likes

new Modular Skylight system ArchiCAD library from VELUX

The new skylight system was published. Modular Skylights: Longlight, Ridgelight and Ridgelight with beam. With individual options and vertical, horizontal and ridge position on roof. http://www.manubim.com/en/solution/velux-modular-skylight

Anonymous by Not applicable
  • 5901 Views
  • 6 replies
  • 0 likes

From tetrahedron to sphere

There is a difference from the computer assisted design 2D and 3D. A curved line 2D in mathematics is written f(x,y)=0, when a 3D surface is written f(x,y,z)=0. Both formulae represent a continuous group of points, in the plane 2D or in the space 3D....

Anonymous by Not applicable
  • 2309 Views
  • 0 replies
  • 0 likes

Custom object parameters for scheduling

Is there a way to assign a custom parameter/field to a project ... ie. I have a bunch of custom made electrical symbols. I can schedule them but would like to give them a Custom Parameter field such as Schedule Name for example. I don't want to edit ...

jakubc7 by Advocate
  • 2477 Views
  • 5 replies
  • 0 likes

Some useful GDL scripts (in Italian)

From the Moderator: This gentleman was nice enough to post some GDL scripts that may be useful for users of ArchiCAD. However, they are all in Italian. What we decided is that we merge all these 7 posts into one thread. YOu may try to use Google Tran...

Anonymous by Not applicable
  • 6086 Views
  • 8 replies
  • 0 likes

Install old libraries

Hello all: Due to a computer meltdown I had to install a fresh copy of Archicad V16 on my new PC. While I was able to save all of my projects I was not able to save the libraries. One of the files I was working on was created in V14 using V14 librari...

Anonymous by Not applicable
  • 3433 Views
  • 3 replies
  • 0 likes

Archicad v7 Library (Greek)

Hi! I have and old project that requires the v7 Greek Library. The problem is that I after all these years I cannot find the CD. Does anyone know, where can I find it? Thank you!

Anonymous by Not applicable
  • 813 Views
  • 0 replies
  • 0 likes

Extracting GDL calculated values

I searched the forum to see if anyone had asked this question yet, but could not find anything. Is there a method for extracting a GDL internally calculated value and having it listed in a Schedule? I am able to get the values that I am able to INPUT...

Musical Instruments

After many hours of searching, I have only found old references to musical instruments! With Objects On Line OFF LINE, I need your help! I have already rendered a six room music studio with pianos but the owner asked for a drumset and a couple of amp...

Anonymous by Not applicable
  • 6165 Views
  • 2 replies
  • 0 likes

Floor sensitive 2D projection?

Hi, I have a simple parametric handrail object that was hand-coded in GDL. Its 2D representation is based on 2D projection method. I have no idea how to show only the lower part on the home floor while cutting the top, and vice versa: Show only the t...

Problems ganging windows and other settings

Now we are in v16 of this program I have never been able gang windows without problems It seems like they are adding more details and more parameters as time goes on but have never really got this under control. I am still having to draw white lines ...

Anonymous by Not applicable
  • 2545 Views
  • 5 replies
  • 0 likes

bimcomponents.com downloads

hi, I have 2 problems with bimcomponents.com: 1.- I installed the gdl web plugin, but still can't see the 3d objects on my browser (Safari 6.0). It keeps showing me a message to install the plugin. 2.- I can't download any object at all :S please hel...

Anonymous by Not applicable
  • 2272 Views
  • 2 replies
  • 0 likes

Parameter Label

Hi, I am having real difficulty creating a label for an object I have made. It is an object with a parameter that when I change it, it changes the panel material colour. Now I have got this label to work, however it comes up with error messages withi...

Anonymous by Not applicable
  • 2884 Views
  • 6 replies
  • 0 likes

ArchiCAD 16 - divide by zero - maybe GeForce problem??

Hi everyone!! I use archiCAD since version 5 and this is the first time that I see this error. I have a notebook with a ATI graphic card, but the HDD crash and for the moment I have to change to other notebook with a GeForce graphic card (310m). If I...

Sem título.png
Anonymous by Not applicable
  • 3798 Views
  • 5 replies
  • 0 likes

ArchiCAD Library to require different Libraries

Hello there, we have some projects done in v6.5 (Greek Libraries) but we do not have those libraries now and they are not archived. We have Libraries v6.0 and v7.0 so we were wondering if we could alter the PLN file to require v6 or v7 libraries inst...

Anonymous by Not applicable
  • 1309 Views
  • 1 replies
  • 0 likes

Sash frame on fixed window

Hello, I wonder if anyone can help me? I'm working on a project with two fixed windows and one openable window which I made through the Fixed Casement Combi Window. The problem I have is that the 2 fixed windows have additional sash frames around the...

Anonymous by Not applicable
  • 3644 Views
  • 1 replies
  • 0 likes

2D Objects - scale / size

I created some windows as 2D objects say, 2x3 in the 2d symbol window. i was thinking that once i place the object it would be 2x3. it wasn't. but, once i entered 2x3 in the info box. everything was fine. BUT i went back and edited the original windo...

Anonymous by Not applicable
  • 1442 Views
  • 0 replies
  • 0 likes

Equal Id Tag categories

Hi! I have a Question why all my objects have the same ID Number? "2st Flr Jst". There is any way I can fix it? Thanks

Anonymous by Not applicable
  • 3802 Views
  • 5 replies
  • 0 likes

AUTO CURVE Turning Patterns

Hello members, I'm looking for a 'Turning Patterns' 'Auto Curve' GDL object. I know CADimage use to have one done properly. I found the ones for trucks, but not for cars. Any help would be greatly appreciate it. Cheers

Anonymous by Not applicable
  • 2140 Views
  • 3 replies
  • 0 likes

Constraints between objects & elements.

Hello everyone, it's there any chance to have constraints between archicad elements (beam, column, roof, wall, etc.) & gsm. objects? For example, if there is a beam, and i want that one parameter from my 3D gsm object, to be always constrained by the...

Cosminn by Contributor
  • 1612 Views
  • 2 replies
  • 0 likes

Listing Parameters in a Schedule

Hi there, I need to list the variable N of a certain Object in a Schedule. (bread-n-butter) the variable N is actually a counter in a loop ( for i=1 to ..... N=N+1...) By the end of the loop N stores the value for the number of loops. Here is the pro...

Want to rotate Wine and Champagne bottles with Morph Tool

does anyone know where to get wine and champagne bottles that won't crash AC16. The only bottles I have are from Smart Parts and are very old; don't think AC16 knows what to do with them. Crashes every time. I need to place bottles that have been rot...

Anonymous by Not applicable
  • 3184 Views
  • 2 replies
  • 0 likes

Doors & Zones - Losing hope

In an effort to simplify and route out our reliance on 3rd party objects I have made our own doors and a system for scheduling. The system works and it is simple enough to get juniors to do it. Simply, doors are modeled in 3d including frames and the...

Anonymous by Not applicable
  • 7750 Views
  • 11 replies
  • 0 likes

Wall label

Hello everyone, for a rectangle i need -height of the wall and width of the wall. If the width of the wall is made by a composite structure, how can i choose only the 'CORE' skins thickness?

Cosminn by Contributor
  • 1607 Views
  • 2 replies
  • 0 likes

lamp object

Can I save a collection of objects (basic shapes plus a down light lamp object) as a lamp. Tried to do it through Library & Objects but there is no selection for lamps. If I save as a typical object will it act as a lamp?

W Sliding3 15

This is a stock window in the US AC15 Library, 3 panel slider, fixed middle pane, slider on each side. Does anyone know how to edit this window to make the panes unequal, so I can have a larger fixed middle pane with two smaller vents?

BIM components other website, i.e. intranet?

I wonder if anyone can help me on this one - We would like to have our office library accessible not only to our ArchiCAD users but also as a viewing window to the Revit and AutoCAD users in the same company (yes we are surrounded by the Dark Side!) ...

Anonymous by Not applicable
  • 2398 Views
  • 1 replies
  • 0 likes

Missing macros in pla file

I have someone who is working on a pla file I archived. I use Smartparts libraries for doors and windows. We are both getting "can't find micros" opening in 3D. I have taken the original folder containing the macros and loaded it, and still get the s...

how to open .lcf object folder

Hi, I downloaded a .lcf object folder from internet, when i add into my library from library manager, ut it can't find from my embedded library. Anyone can help?? Thanks. Cheers, Hazel

Anonymous by Not applicable
  • 15759 Views
  • 1 replies
  • 0 likes

glob_context of cut element

I know glob_context= 4 is for section/elevation, but is there anyway for an object to know that it is being cut in section/elevation. I have objects that I want to display more detail if they are being cut. If they are not being cut, I want to conser...

Oval Window from AC15 library -> error

Hi All, First of all, i'm using the dutch archicad 15 library. When i use the Oval Window, there is a problem with the window-object when i use a reveal. When i don't use a reveal then the window is drawn perfectly. On the picture below, you can see ...

Screen Shot 2012-08-09 at 16.28.01.png
Anonymous by Not applicable
  • 1568 Views
  • 1 replies
  • 0 likes

BIM Components Registration Number

Dear All, During BIM Components Registration process a number is generated. I am asked to copy it into "ArchiCAD's Registration Number field". Where to find this ArchiCAD's Registration Number field? In ArchiCAD itself, on bimcomponents.com or myarch...

Anonymous by Not applicable
  • 2947 Views
  • 3 replies
  • 0 likes

AC16 labels

New feature of AC16 http://www.graphisoft.com/ftp/publishing/ac16_help_INT/Files/wwhelp/wwhimpl/js/html/wwhelp.htm#href=NewFeatures.02.27.html Streamlined Label Options The old tool-specific labels have been merged into just two library parts: Struct...

Anonymous by Not applicable
  • 1445 Views
  • 0 replies
  • 0 likes

Problem updating AC 14 library

I use ArchiCAD 14 and got a message saying my object library was not up to date, so I downloaded the new one from the site and kept the folder icon on my desktop as I did not know what to do next. Then I read the help section where it says you decomp...

Anonymous by Not applicable
  • 1588 Views
  • 1 replies
  • 0 likes

custom zone stamp

I am hoping that someone can help me with creating a custom zone stamp the same as Zone_Stamp_2 15 but with an additional line for Floor Level (it could be the same as the Ceiling Height but reference the zone level?). I have very basic (practically ...

Door opening

Pleas help~ I can't find the reason for the error on door display, refer to attached screen shot.

Anonymous by Not applicable
  • 2890 Views
  • 5 replies
  • 0 likes

Kitchen Layout 16

Kitchen Layout 16 Have to say this library part is an amazing new tool for conceptual layouts. So simple to adjust kitchen to suit ever changing ideas. Takes 5 second to figure out and a great time saver. More library parts like this please. Maybe a ...

4 panel sliding / pocket door

i am looking for a 4 unit slider that all units slide one way, not split into two pairs like the d4 sliding v15 library object. do not need it to pocket for this project but would be a great option. any ideas?

aahatimo by Newcomer
  • 10610 Views
  • 11 replies
  • 0 likes

user defined size of the matrix

Hello I need to define the size of two AA matrix [2] and BB [3], where x = any value entered by the user. Values ​​in the matrices AA and BB will then enter the user. Thank you for your help.

Anonymous by Not applicable
  • 1217 Views
  • 0 replies
  • 0 likes

Wish upon an Object from BIMcomponents.com

Is everyone aware of this post by Levente Filetoth? http://archicad-talk.graphisoft.com/viewtopic.php?t=40112&start=0&postdays=0&postorder=asc&highlight= I know I for one don't often check that part of the forum. Or not regularly enough.

What about commercial objects on BIMComponents.com ?

Why BIM Component.com don't include developper account to upload commercial product ? If the wish is to get a unique site to share GDL objects, it would be great to find all commercial product in the same place and to propose pay by one click with pa...

Anonymous by Not applicable
  • 2790 Views
  • 3 replies
  • 0 likes

Betafence_INT library issue

Hi, I wanted to use the BetaFence library available in the Object Depository but when I stretch the object the position of the posts is not shown correctly in 2D. Refer drawing. The module of the fence is 2.530 and when I stretch it to 5.060 the post...

Betafence_INT.JPG
Gops by Newcomer
  • 1593 Views
  • 0 replies
  • 0 likes

Stretchable GDL object

Hi, I have made a 3D Drainage Tube in GDL with this possibilities: 1. Start point enables stretching the tube on the axis line 2. End point enables free stretching in ANY direction. After use of point "2", Start point lose the "Move node" icon on the...

Anonymous by Not applicable
  • 4014 Views
  • 5 replies
  • 0 likes

Rotating object around x and y axes

Hello all, How can I rotate an object, a slab or a library element, around its y axis? I created an object and saved it in the library but the orientation is not right. Any help is good. Thank you.

Banyan Tree Object

I'm looking for a banyan tree object, for a rendering. Thanks for whatever help you can provide. Best, Dennis

DennisG by Participant
  • 1715 Views
  • 1 replies
  • 0 likes

Wish upon an Object from BIMcomponents.com

Dear Archi-Talkers, I guess I am preaching to the choir when saying that GDL is one of the core assets of ArchiCAD. To provide support for great GDL content to get created we launched BIMcomponents.com with ArchiCAD 16. In order to give some boost to...

Custom Curtain Wall Panel

Hi, I am just wondering how a get the curtain wall settings in my GDL script. I would of thought I could just use CWPANEL_WIDTH for the width of the panel CWPANEL_HEIGHT for the height But this seems to just set the panel width to 0? Do I need to use...

Anonymous by Not applicable
  • 6012 Views
  • 10 replies
  • 0 likes

Making A GDL object from another

How can I create another object from a current (and then make changes) ie Electrical symbol: weather proof receptacle. It is the receptacle symbol with a WP by it. I want it to be WP GFCI. Under lighting the symbols have text that is editable, but no...

Anonymous by Not applicable
  • 1753 Views
  • 1 replies
  • 0 likes

Ellipse Cased Opening problem

Hi everyone, this is my first post here, fortunately because I haven't had to post yet because of the helpfulness of this forum. I am having an issue creating an ellipse cased opening. I have tried methods to achieve this, and have still failed. I tr...

Anonymous by Not applicable
  • 2967 Views
  • 3 replies
  • 0 likes

Problems loading and saving libraries

Reference Guide page 210 says that to add an object file to an Embedded Library you must use the Library Manager, click Add, browse to the object and click Choose, or else drag and drop. I am not getting this. I thought all you needed to do was to pl...

Anonymous by Not applicable
  • 1450 Views
  • 1 replies
  • 0 likes

Layer visibility from within GDL object?

How could i request a visibility of a specific layer from within the GDL object? Thanks for answering. I'v made a Legrand electric outlet object, as a window. And now i want, that it should test certain layer "Electric outlets" visibility and if it i...

Anonymous by Not applicable
  • 2034 Views
  • 1 replies
  • 0 likes

Favorite GDL objects

Once you have saved GDL objects as Favorites, how do you update the default settings for any one object? Also, is there a way to reorder them in the Favorites palette? For example, I want to have the BEDS display not in alphabetical order (Double/Kin...

Anonymous by Not applicable
  • 3861 Views
  • 4 replies
  • 0 likes

window shutters ?

Are shutters another object, or is there an option someplace that I have not found?

Anonymous by Not applicable
  • 3020 Views
  • 4 replies
  • 0 likes

tryin to create new object - options grayed out

when trying to save my new custom object the "save object" window comes up but i cannot select the options button to turn on "remove redundant linesd from symbol""......whats wrong or whats up with that???

Anonymous by Not applicable
  • 1384 Views
  • 1 replies
  • 0 likes

Wall to wall junctions

Hello, I have some walls to the side and above another wall but on the same plane (ie in a straight line). They are all using the same composite wall type and same finishes, but can be on different layers or the same layer. My problem is that in 3d I...

stair walls.jpg
sarahric by Contributor
  • 6834 Views
  • 10 replies
  • 0 likes

Door Marker NCS 15: A Tale of Two Markers?

Hi Folks, This is weird. Look at attached two images. One is of D1 15 swing door, with Door Marker NCS 15, not working. One is of pocket door, with Door Marker NCS 15, working as desired. Tag shows Zone Number where marker is placed and object ID. Se...

Anonymous by Not applicable
  • 6678 Views
  • 11 replies
  • 0 likes

GDL on Facebook

I know this is the main location for GDL discussion now. the Yahoo group GDLTalk hasn't been used for two years, and I posted an item today, just out of interest. But it may be best to close Yahoo group.... http://tech.groups.yahoo.com/group/GDLTalk/...

save custom material to object?

Is it possible to save my own custom material to a custom object? The cup I made has the material I created. But the material only works if it is added to the embedded library of the project. Is there a way to 'embed' the material within the .gsm fil...

Anonymous by Not applicable
  • 4278 Views
  • 3 replies
  • 0 likes

GDL code for line thickness (NOT pen number)

Does anyone know the GDL code for current lineweight (I mean, if I adapt the object "Pens and Colours 15" to show instead of the RGB, a text reading of 0.35 or 0.18 as a lineweight of that particular pen, what is the code meaning 'lineweight'.? Thank...

Anonymous by Not applicable
  • 5140 Views
  • 10 replies
  • 0 likes

'Save Selection as Library Part' gone in AC16?

Just upgraded to 16 from 15 and the 'Save selection as Library Part' function is gonzo? How to make simple library parts now? Need lattice fencing for deck skirting if anyone knows where to find that? AJ

Anonymous by Not applicable
  • 19166 Views
  • 23 replies
  • 0 likes

3D tree object beyond parameters

I would like to know why this happens, when I use a tree object from the Archicad library and resize it, the leaves are left floating far from the trunk and branches and well beyond the dimensions given. For example, I have a tree here that is 850x85...

sarahric by Contributor
  • 11835 Views
  • 12 replies
  • 0 likes

GDL OBJECT / LABEL DISPLAYING X Y COORDINATES

HI ALL, Hope someone can help me, I have done a good search but am having trouble finding a solution to my problem.. i am looking for a very simple object that displays the x and y coordinates of a point on my plan .. my aim to to export the list as ...

Anonymous by Not applicable
  • 25325 Views
  • 28 replies
  • 0 likes

Round Opening, Centre Point

OK, I have a bit of a long winded question. I am using the 'W Round Opening 15' object for penetrations to my core walls. This appears fine. However when I open my concrete core elevations, I cannot dimension to the centre of the opening. I think thi...

round opening.JPG
Anonymous by Not applicable
  • 2564 Views
  • 2 replies
  • 0 likes

How to align textures on glass in windows?

I am experimenting with textures on glazing to be used in windows and doors. On a wall you can align in 3D a texture/fill pattern. If you try to align that same texture on the glass in a door or window, the command will not work. I was hoping to have...

Cutting in 3D

Hello everyone, please help me with a 3d script for this situation. I have attached a PDF file. Thanks a lot.

Cosminn by Contributor
  • 1794 Views
  • 2 replies
  • 0 likes

Paragraph and Parameters

Hello, I created a custom tag in AC14 and save the selection as an object (.gsm) It has 3 different text elements. What I want to do now is edit the tag in gdl so that I can establish what the text says via parameters. The gdl script shows the text a...

Anonymous by Not applicable
  • 1298 Views
  • 1 replies
  • 0 likes

Custom Tag Creation

Hello, I've been trying to create a custom tag that has a rectangular box with a line dividing it in the middle. on the left side I need a Letter representing the material, on the right side I need a number representing the atual finish. Finally this...

Anonymous by Not applicable
  • 1992 Views
  • 5 replies
  • 0 likes

Dimension Markers Doors

Hello! Is there a way to add dimension markers to all doors? Not applying it to each door separately. Coz I did it yesterday and now I saw that program hasn't saved anything and I'm really pissed. Thanks in advance!

Anonymous by Not applicable
  • 1191 Views
  • 1 replies
  • 0 likes

Window Anchor Request

Hi All, I am trying to find out if there is a REQUEST for GDL to allow me to query what the current window object 'Anchor' setting is - eg Sill to Wall Base / Head to Wall Base etc. I have tried the GDL references and new features but cant find anyth...

Window-Anchor.jpg

DRAWINGS IN THE LIST

Is there any command for a separate drawing in the object inventory list? and i have to write this command in 2d script or 3d or ...?

Cosminn by Contributor
  • 1249 Views
  • 0 replies
  • 0 likes

Using GLOB_CONTEXT to stop object from printing

Hi, we'd like to make a 2D object that displays on screen, but won't print - similar to Hotspots or Section lines. Can this be achieved using GLOB_CONTEXT? I can't see a code for 'print' at all. Or is there another option? Any help appreicated! Cheer...

Wallhole gap above doors

To provide what is required of me in the door schedule, I have created doors with a unit size, then a larger wall opening size. This can be seen in 2D. In 3D however, the wall lining covers the opening on the sides, but not at the top. This means I a...

sarahric by Contributor
  • 3763 Views
  • 6 replies
  • 0 likes

GDL course on Codecademy

We're thing of producing a GDL course on codecademy.com Would people find this useful? We want to get some feedback before we invest the time!

Anonymous by Not applicable
  • 2120 Views
  • 2 replies
  • 0 likes

Window object errors

With Archicad 14 4204 HUN and "ABL2 bukó-nyíló 14" the ledge (párkány) of the window is misplaced if the window has a bottom reveal. The ledge appears hovering reveal height above the reveal. With "ABL szellözö 14" I am unable to set the material of ...

piton by Newcomer
  • 1124 Views
  • 0 replies
  • 0 likes

Insert a variable into a custom made 2D GDL object

Hi all, I'm very new to GDL modelling so this is (I would imagine) a basic question. I have created a 2D object which consists of a circle and in the middle of the circle is a number. I would like the user to be able to define the number through the ...

Anonymous by Not applicable
  • 1921 Views
  • 2 replies
  • 0 likes

'CALL' affecting scripts even within an IF statement not met

Please help to solve a mystery. This occurs with a custom window created in an old AC version (I think it was AC7). Now I'm trying to add some functionalities and update the window to AC15. The object has the following segment in its 2D script: IF co...

Durval by Booster
  • 2441 Views
  • 4 replies
  • 0 likes

Wrong Wallhole shape for default library windows.

I'm working on a model that has a lot of circular windows. to create these i used the "w round fixed 14" window in archicad 15. When i placed the windows initially the wallholes were circular however at some point the walholes became square as shown ...

Anonymous by Not applicable
  • 2129 Views
  • 3 replies
  • 0 likes

BIMcomponents???

I had a reminder to check the BIMcomponents website today, when the countdown for the inauguration of the site was supposed to be over... Now the countdown is over, and the site now reads "coming soon"... It does not look good for Archicad 16, does i...

Anonymous by Not applicable
  • 7846 Views
  • 16 replies
  • 0 likes

Import Export of Window and Door Marker

I am wondering if it is possible to import or export Window and Door marker? Because i am using AC15 Int and an affiliate uses AC Norwegian and therefore there files contain Door and Window marker which i wanted to import into my own file (int versio...

Anonymous by Not applicable
  • 6478 Views
  • 3 replies
  • 0 likes

Smoothing geometry for Google Warehouse object imports?

When importing objects from Google Sketchup the result in ArchiCAD is always really faceted/triangulated-looking regardless of whether the edges were first smoothed in Sketchup. This is fine for rectilinear shapes but not so much for shapes with warp...

Anonymous by Not applicable
  • 8356 Views
  • 12 replies
  • 0 likes

How do I change the Plasma TV's Screen Image?

I would like to change the displayed picture from the picture of flowers, to a photo rendered image of my house. The idea is there are several TVs and it is a security camera monitor. I already have the images I will use, but I don't know how to actu...

Anonymous by Not applicable
  • 6342 Views
  • 3 replies
  • 0 likes

StairMaker Listing Settings

The StairMaker dialog box has a tab page called Listing Settings. Outside of the “General” category, I can’t seem to map the properties on that tab to parameters found in the objects, for purposes of listing. I’ve searched “Additional Parameters” via...

AU essentials - vantiy

anyone have this issue with the vanity item in AU essentials library..?? in 12 it use to space the bowl 800mm or so above the bench top, now in 14 its spacing it sideways..

Anonymous by Not applicable
  • 1971 Views
  • 3 replies
  • 0 likes

Force Parameter Text

OK, not sure if this is posible but I will give it a go. I am in the process of creating my own multi-use door for use on future projects. What I would like to do is force text within a parameter for use in scheduling. For example, if my door has a v...

Anonymous by Not applicable
  • 2778 Views
  • 5 replies
  • 0 likes

"semi" global variable

This one has been bugging me for a while now and just can't figure it out. I'm having trouble with an object I made some time ago, the Multi Group Sequential Numberer (in the depository) It has proven to be invaluable when numbering parking spaces wh...

Anonymous by Not applicable
  • 4701 Views
  • 7 replies
  • 0 likes

Door Frame fill

This is less of a real issue and more of a general annoyance when looking at a plan. Has anyone come up with a good way to represent a door frame when there is a fill beneath? Have a look at the images below. The first is with the door frame fill set...

Anonymous by Not applicable
  • 3250 Views
  • 3 replies
  • 0 likes

How to change colors of 3D cursor in 3D Window

Hi, I'm very new to GDL programming and so far I have found it to be very fascinating and interesting. Was just wondering if there's a way to change the color of the xyz cursor (the Object Making book calls it the 3D Cursor) in the 3D view window? I ...

Anonymous by Not applicable
  • 2619 Views
  • 3 replies
  • 0 likes

Library Objects Background

Is there a way to set a new default color for the background color of the objects?. By default, my library shows them always with a pink-ish color (color 19). Is there a way to set the Background color (-1) as the default color?

Anonymous by Not applicable
  • 2800 Views
  • 5 replies
  • 0 likes

GDL 101 windows question - setting the origin

Finally got my own window "working" (basically a curtain wall with graphically editable panel materials, staggerable transoms etc) and I'm pretty happy with it BUT... I missed something in class. I think what I'm asking is : how do you set your origi...

Anonymous by Not applicable
  • 5305 Views
  • 10 replies
  • 0 likes

working in inches appears to create problems

It has been days trying to figure this what I thought was a simple formula. All I am trying to do is calculate board foot (bf) from these outputs w = 1 1/2" h = 5 1/2" L = 12' I have found that when doing the board foot formula is is in metric so I h...

Anonymous by Not applicable
  • 2117 Views
  • 4 replies
  • 0 likes

Macros: defining parameters from caller objetcts

Hi, I've run into a set of similar problems. I code a complex railing, that is stretchable and whats components are (banisters, rails) exchangeable. The stuff is made through embedded macros, the the top level object responds for general geometry, wh...

Modeling a New Component in ArchCAD 15

Hi everyone, I would like to model a new component (RFID Tag) in Archicad 15 and then assign some attributes base on IFC to that component. anybody here can tell me how can I do that?

Anonymous by Not applicable
  • 7854 Views
  • 9 replies
  • 0 likes

Parking Place Polyline 15?

Hi, I can't seem to find the Parking Place Polyline in archicad 15. Was it deleted? and if so, is there a way to import it from archicad 14 without having to load the entire archicad 14 library? thanks!

Anonymous by Not applicable
  • 4401 Views
  • 6 replies
  • 0 likes

2d AC made object

I drew up a simple combination 2d (smoke & carbon monoxide alarm symbol) and saved it as AC object. The funny "backwards' S is symbol for smoke and I was able to change the pen for it (after initial creation), but not the line (spline?) thickness whi...

CO-SD.jpg
Anonymous by Not applicable
  • 2099 Views
  • 2 replies
  • 0 likes

Tips on animating objects

I just saw a discussion on linkedin about how to animate objects in ArchiCAD. This is actually surprisingly easy to achieve with basically any existing parameter - a fact most user don't realize. Eg say you have a car object that you want to move 1m ...

Anonymous by Not applicable
  • 7058 Views
  • 6 replies
  • 0 likes

GDL 2D Display Order

I'm having trouble adjusting the "stacking" of 2D elements in a GDL object. Is there a way to control the display order such that, for example, an opaque fill could mask a line "beneath" it?

Autotext code for Back Reference?

I am trying to create a drawing label, but cannot seem to place an auto text string corresponding to back reference information. I note when placing auto text there is a greyed out 'reference' category. How do I un-grey this so I can see what autotex...

Split Layout ID for Reference Markers

Hi, I am having a bit of trouble with the code for my cross referencing to layout ID. For example my section marker. Some of our projects we have long layout numbers. Eg. WAA-AD-3000. (We dont always have contol over what we can number our drawings) ...

Anonymous by Not applicable
  • 2280 Views
  • 3 replies
  • 0 likes

Cadswift Parts review?

Considering picking up some CadSwift parts, the joinery (cabinet) part in particular. http://cadswift.com.au/products/Swift-Joinery.html Anyone have experience with this or other parts by Cadswift? USA users in particular? Thanks.

Anonymous by Not applicable
  • 1206 Views
  • 0 replies
  • 0 likes

Door Handles

How can I make the door handles on a double leaf door, appear on both leafs? I've got a double leaf door (D2 15 from archicad 15 library), and have selected a door handle. It only shows on one door leaf and i need it to show on both. I've been lookin...

neillunn by Newcomer
  • 8678 Views
  • 6 replies
  • 0 likes

Revision table object

Hi All, While I am a long time user of ArchiCAD (since version 6.5) I have never really gotten into GDL scripting. So my question may come off as incredibly obvious to regular users of this forum. Kerdels has recently changed over to ArchiCAD at my u...

Anonymous by Not applicable
  • 7964 Views
  • 10 replies
  • 0 likes

Creating (updating) a title type object

So now that we finally updated to 15, my titles are not displaying correctly on the layout sheets. So, I went back to my original master layout file where I created our titles, made sure they were the right size, right text, etc., then saved them as ...

Anonymous by Not applicable
  • 1321 Views
  • 0 replies
  • 0 likes

simple 3D complex 2D

Hello all. I was wondering. Is it possible to create a very simple (let's say a cube) 3D object that produces a complex 2D representation in sections and elevations, not produced by the projection of the model itself? thank you111.1

Anonymous by Not applicable
  • 2693 Views
  • 5 replies
  • 0 likes

Windows on inner wall face

Hi, I would like to know if there's some way to automatically adjust the windows to the inner wall face. It seems archicad always positioned the window in the exterior face of the wall and I must "manually" move it to the inner one, so every time I c...

godi by Enthusiast
  • 7182 Views
  • 12 replies
  • 0 likes

BIM components

Wow, it's interesting: http://www.graphisoft.com/community/press_zone/ac16.html

Anonymous by Not applicable
  • 1726 Views
  • 2 replies
  • 0 likes

New (not BIM) server, same libraries

Hi all. Converting our libraries' server (not a BIM server yet) from Server1 to Server2. All files in the same places, relatively, but new server name. Is there a quicker way to make the transition than manually re-linking all the libraries of all ou...

Anonymous by Not applicable
  • 2050 Views
  • 3 replies
  • 0 likes

library parts and manager

I just down loaded a window gsm into a folder, then used the library manager to add the window. the manager says that the window is in my linked library in it's own folder. when i open the object tool and try find it, it's not there. how does this wo...

Anonymous by Not applicable
  • 4654 Views
  • 7 replies
  • 0 likes

Curtainwall Door/Window Opening Line Orientation

I've noticed this problem for a while now, and wondered if anyone else had run into it or found a solution that I'm missing. The opening line orientation in the Door and Window Panels for the Curtain wall tool will not display correctly like a normal...

door_op_lines.JPG

Window Marker Unit

This question pertains to the U.S. version: A window marker's position is defined in the Marker Settings panel: "Marker Position" and Marker Offset". Default shows a value of 20 for "Marker Position". The same units are displayed in the Tracker when ...

gsm objects

I've got some probably basic questions. How do you: 1. convert 3ds. objects into gsm. files (to use them in Archicad) 2. open 3ds. models in Artlantis just to add them into your project? 3. What to do when dwarfs of downloaded gsm objects (from archi...

Anonymous by Not applicable
  • 7255 Views
  • 7 replies
  • 0 likes

Object resolution problem!

Hello everybody! I try to make a power switch that has curves and the resolution is too low that instead of curves it creates polygon. I try to make it in two ways: 1) Using profile 2) Archiforma 2 Should I change the precision of drawing units? Can ...

Anonymous by Not applicable
  • 2022 Views
  • 1 replies
  • 0 likes

Add Handle To Created Door Object

Hi everyone I have created a GDL door object, but don't know how to add the custom handle to it. Can anyone help me in this regard. I'll be waiting to receive your advise tchao Mohammad

Anonymous by Not applicable
  • 1571 Views
  • 1 replies
  • 0 likes

Editing existing library parts to solve 2d symbol problem

Hello, this is kind of a GDL object/Schedule question. I'm trying to solve the problem listed here: http://archicad-talk.graphisoft.com/viewtopic.php?t=34647&start=0&postdays=0&postorder=desc&highlight= However this person was using a 2d symbol they ...

Anonymous by Not applicable
  • 2517 Views
  • 1 replies
  • 0 likes

Embedded library problems

I have a weird problem with objects in my embedded libraries. Sometimes after opening a project, few library parts get duplicated and archicad issues duplicate objects warning. After I delete duplicate objects, save my project, close it and reopen it...

Layers in ArchiCAD 15 objects

I recently opened an object in ArchiCAD 15 to see how it's 2D symbol was composed in layers, but it seems that the layer control/visibility switches are gone! ?Any explanation?

Scripts for Area Measurements in Acres?

Hello, I have to use ArchiCAD a lot for mapping site areas, which are often needed in Acres and I haven't found a way to set this up automatically. I have heard that a script can be added to Zones to convert an area to Acres, but I am not familiar wi...

Anonymous by Not applicable
  • 1982 Views
  • 2 replies
  • 0 likes

Power Sockets and Light Switches

Hi, i seem to be having some trouble finding an elements that i can use as a power socket and as a light switch. I've seen the ones in "2D" but they are only usable in plan view and i need to make some renders. I usually do my renders in Artlantis so...

Anonymous by Not applicable
  • 14143 Views
  • 16 replies
  • 0 likes

sketchup & gdl

I used archicad 15 (3006) and I downloaded sketchup add on , and this worked , today I updated archicad to 3602 , and now this doesn't work:(please help me;D please tell me , where in archicad (if this possible) i can turn on section gdl object on pl...

Anonymous by Not applicable
  • 990 Views
  • 0 replies
  • 0 likes

Lot with High Mt. trees - Pines & Firs

I am looking to do a major remodel on an Existing 1972 structure. The project is in what is Called a "scenic corridor". I want to Model the Site accurately and it is always the large Pine and Fir trees that have high Crowns with no limbs for often 30...

Lot 27 View.jpg
Anonymous by Not applicable
  • 5554 Views
  • 6 replies
  • 0 likes

FREE Downspout GDL

Click here to download a FREE Downspout GDL made in Archicad 14, USA version. This is not spam. This is a legitimate free give-away. Thanks.

Anonymous by Not applicable
  • 1378 Views
  • 1 replies
  • 0 likes

ArchiCAD 15 Library - Straight Stair 15

I can't find any reference to this issue here on any forum area (doesn't mean it isn't here, under some obscure/carelessly named topic), so I'm posting as new topic - moderator, please feel free to re-direct this to an existing thread. I've recently ...

GLOB_CONTEXT question

Does anyone know the function of GLOB_CONTEXT = 22, 23, 24 etc? What is meant by "editing feedback mode" and how can it be used? I would like to have something drawn in plan only while the part is being modified by a dynamic hotspot. I'm pretty sure ...

Anonymous by Not applicable
  • 2125 Views
  • 3 replies
  • 0 likes

Custom Door Handle

I've been trying to create a custom door handle, using mostly the beam tool. Once I select the objects, I choose libraries...save custom component. Then I choose this custom handle from the door object dialog box, but still I can't get my custom door...

Anonymous by Not applicable
  • 10143 Views
  • 4 replies
  • 0 likes

Good Plant Symnols?

Hello, I'm looking for some good (free) plant symbols in addition to the tree symbols in the archicad library. I've downloaded the Cadimage trial, however, the plants don't seem to be working correctly - either they are missing or they won't match th...

Anonymous by Not applicable
  • 2647 Views
  • 2 replies
  • 0 likes

Archicad tries to stretch objects when inserting

Hi, I am doing a training exercise and when I insert a newly created object archicad tried to draw a scaling type rectangle, and the object gets scaled in two directions to fit this rectangle. I would just like one click and the object inserted at 1:...

Anonymous by Not applicable
  • 2408 Views
  • 2 replies
  • 0 likes

firs & cedars

I'm looking for some good evergreen models or objects. I'd like to create detailed fir and cedar trees with a little bit of control over branching sizes and placement. Not finding anything yet.... thanks! Dave

Anonymous by Not applicable
  • 1730 Views
  • 2 replies
  • 0 likes

My first GDL object!!! Tile object

Hi, i have made my first GDL, it's a object that realize tile objects. I have made a videotutorial explain how it works. www.youtube.com/watch?v=A3mfHPgx6IY If anybody can probe it as "betatester" can mail me.

Anonymous by Not applicable
  • 3885 Views
  • 5 replies
  • 0 likes

Getting Window Sill, Apron & Stool to Work AC14

I am trying to represent a Window trim that is accurate. The trim is to have and Exterior Sill and Apron (Wish Apron could be adjusted) and and Interior Sill (Stool) and Apron. Usually we only have interior Stool & Aprons and it seems to work fine fo...

Anonymous by Not applicable
  • 5307 Views
  • 4 replies
  • 0 likes

Request Zone_Relations in 3D script

Hello, I have a problem with the REQUEST Zone_Relations It's working fine in the 2D script but not in the 3D ?! I use archicad v15 main script : nomCat = "" codeCat = "" nomZone = "" codeZone = "" nomCat2 = "" codeCat2 = "" nomZone2 = "" codeZone2 = ...

Anonymous by Not applicable
  • 2998 Views
  • 6 replies
  • 0 likes

Rotate rooflight?

Hi all, I have a sky light (see attached image) and currently its slope is following the roof pitch. Although the roof is flat, my understand is that it requires a roof pitch set at 0 degrees. Is there a way to rotate the sky light 90 Degrees? and mo...

Screen Shot 2012-03-29 at 15.38.57.png
Anonymous by Not applicable
  • 3533 Views
  • 3 replies
  • 0 likes

A rethink on library parts - the "Part-module"

Library parts -still no 'visual' object builder -version upgrade must be managed and can be problematic A reasonably simple method to address this issue - the "part-module": -create an object with native archicad elements. Copy and save as module fro...

Anonymous by Not applicable
  • 1429 Views
  • 1 replies
  • 0 likes

Window library error message

HI I am using archicad 14 and i keep getting this error message: "incompatible types in expression at line 80 in the master script of file W1 14.gsm" how do i remove it as i am unable to use that particular window type?

Anonymous by Not applicable
  • 953 Views
  • 0 replies
  • 0 likes

Meshes and reinforcing fabric

I am looking for steel meshes and reinforcing fabrics. Has anyone written, or seen, such an object? Or should I make my own?

KeesW by Advocate
  • 3237 Views
  • 1 replies
  • 0 likes

Door hand issue MAJOR Bug?

I have been doing a door schedule for years, and sent many out with no complaints. However today a builder called and told me all the "hand" designations are wrong. I know it is a confusing thing for most of us to get straight, but I assumed the comp...

Array parameters

Hi all, my name is Daniel and i'm from Romania. I started creating more GDL objects, and i got a problem with array parameters, maybe you can help me. I have 3 parameters A, B and C. IF A=2; B=3 then I want that parameter C have 2 values because A=2 ...

Cosminn by Contributor
  • 1637 Views
  • 1 replies
  • 0 likes

HOTARC2

I have problem with HOTARC2. Under some circumstances, it is not placed where an ARC2 with the same parameters. Looks like it ignores some of the coordinate transformations. In Archicad12 it was completely wrong, in Archicad14 it is sometimes wrong. ...

piton by Newcomer
  • 4254 Views
  • 7 replies
  • 0 likes

3D Object - Error in Expression

Hi, I just tried to create a 3D object but when I insert it, it first tries to stretch it to a different size and then it crashes when I go to the 3D window and say error in line 841. I made the 3d object and saved it as a gsm. But re-inserting it do...

Anonymous by Not applicable
  • 4524 Views
  • 5 replies
  • 0 likes

Doors opening in 3d

I would like to know if it is possible to have doors open in a 3D view but closed in elevation view. It makes it very difficult to open all the doors when wanting to view in 3D.

sarahric by Contributor
  • 5468 Views
  • 6 replies
  • 0 likes

Objects missing.

Boa Tarde, When opening a document with AC12, objects are missing. When selecting an objecto (the dark dot) it is impossible to read the name and open the object dialogue window! (see attached file) Obrigado. Thank you.

Anonymous by Not applicable
  • 1684 Views
  • 1 replies
  • 0 likes

Set a parameter based on a saved view in Viewmap

Hi there, Can I get an object to cjhange a parameter based on what view I have saved in viewmap, ie I have presentation plans & construction sometimes on the same storey but different layer combination. I want an object to appear different (text font...

Anonymous by Not applicable
  • 2300 Views
  • 4 replies
  • 0 likes

Text Orientation & Anchor

Hello all - I'm having trouble with a relatively simple part. All I want to do is modify the "Cube 12" library part so it displays some text that reads horizontally with its anchor point (which is the center of the text) at the exact center of the ob...

Anonymous by Not applicable
  • 2727 Views
  • 2 replies
  • 0 likes

Window casing reveal issue

can someone tell me why this casing is offset the way it is? i can't seem to get it to change. see pics. i'll attach the other pic in the next post. wb

Anonymous by Not applicable
  • 10025 Views
  • 11 replies
  • 0 likes

Wall accessories (Accessories Library) question

Am applying interior trim elements to an exterior wall. The wall extends from -48" (below project zero) to 10' height. The wall accessories tool reads the wall and applies the base at -48" and measures up from that point for wainscoting. Any way to s...

end panels too big?

Why are the end panels on the cabinets too deep? there doesn't seem to be a way of changing it from what i can see. WB

Anonymous by Not applicable
  • 1311 Views
  • 1 replies
  • 0 likes

empty opening overhead lines

I have placed an empty opening in a wall, but i need to show that it is an opening not the end of two walls. no matter what i do with enabling object line types, cut lines, uncut lines, floor plan display etc, i can't get dotted lines to show the wal...

Anonymous by Not applicable
  • 4126 Views
  • 4 replies
  • 0 likes